Hi yes he has fitted the permanent pilot version pcb and you have the electronic ignition version ! It will all work fine except your fan will run constantly at low speed as this is needed to disperse the fumes and heat from the pilot version! If it's the old type pcb beige in colour and not...
Toe knee it does sound like the main heat exchanger has got a pin hole causing the water to leak out of the heat exch down the condense pipe!
Your best option is to take out a fixed price repair with the manafacturers covering all parts and giving you a years warranty! IMO the boiler is a very...
This is a good all in 1 hot water and heating option!
http://www.discountedheating.co.uk/shop/acatalog/Heatrae_Sadia_Electromax_Electric_Combi_Boiler.html&source=gg_heatraesadia_heatraerange-electromax_electromax_b_21774590221_1t1_g
Turn the cold mains off and if you get heating you no its a hot tap or shower letting bye somewhere if you don't you need a new wax diverter assy! :wink:
Sorry to say that if you have water coming out of condensate when boilers not even on then it's definately the heat exchanger! Your best bet would be to do a fixed price repair with heateam which includes all parts and a years warranty! :wink:
You would not be able to flush the boiler through! Your symptoms to me say that your plate heat exchanger is blocked up! When you run the hot water do the temperature lights go right upto 80 ?
Sounds to me like the pump proving pin is sticking up in the on position as when the boiler tries to fire again it checks it is open circuit first if it is sticking it could be the diaphragm or a blockage in the bypass pipe ;0)
It won't need new immersions just the thermostats replacing! These type are renowned for nuisance overheat tripping due to the location of the overheat sensor this has been rectified in the new type white in colour thermostat and by replacing for this type will solve your problems! :roll: