Recent content by gcharlt

It is a 2 gang,1 operates 2 x outside wall lights the other is to operate the fence lights but is not connected at the switch yet as it is a new cable which was installed when wall was plastered,hope that makes sense

Hi not at home till week end but 1.5 twin & earth at switch

We have a 1.5 cable running into the garage from a switch inside the house. I want to put some lights around the fence in the garden operated from the inside switch.I assume i will need a box of some decription either in the garage or outside to make the connection. Any help regarding...

Thanks for the swift reply, could you advise what screws would be best suited to avoid any future squeaking etc. I have used the spax TX countersunk 4.5 x 60mm flooring screws for the weyrock but not sure if they are best suited or an overkill for the ply. Many thanks

Can someone help please i have screwed and glued a wyeroc floor but need to double board it as it needs a further 20mm. I want ti add ply but not sure how to fix the ply to the wyeroc Do i glue and nail,glue and screw etc Any help would be appreciated

Have tried as you suggested and working - brilliant !! Thanks again for your help.

Many thanks will give that a try and hopefully it will work. The 3 parts you blanked out i take it have no relevance? The out L1&L2 were printed on the board but no facility to connect which threw me a bit.

Just phoned neighbour he has a meter i can borrow, Just checked connections and are all ok

When you say connect L to L AND L1 is that using a loop wire between the 2? No dont have a meter. Really appreciate your help on this

That is the diagram as with unit, It shows both my understanding is one is for min speed and other is for max speed

Hi Yes but not sure about how to connect ,not a spark but sure its easy for you pro's, just need a bit guidance

I have just bought an Airflow Aventa 100T shower fan to replace a Manrose and not sure of the wiring diagram,can anyone please help? I have a live,neutral and switched live going to fan but on the fan i have a live,neutral, L1(min speed) & LT (max speed) I connected live and neutral and switched...

Hi Many thanks for clearing that up for me now As least I know I will have to get the experts in to do the necessary. Thanks again for all your help

Many thanks PrenticeBoyOfDerry I have checked and the entry pipes are as you suggested. I will check the continuity tomorrow If all is well on the test would I need to carry out any further checks or could i be satisfied that everything was ok?

Hi AndyPRK Thanks for that I have checked the mains at entry and it is clamped with Earth strap/wire.