Hi, i have just installed an 8XE expander (direct plug onto the pcb).
Have wired an additional 3 zones onto it.
How do i now set it up in wintex?
when i click on zones i see zones 1-8 with location as Panel, but then 9-24 is "N1 E1 Z1" etc
If i use the keypad and view zone status it shows me...
Ok, so had a look, the internal sounder is connected to spk and +12v.
the external bell seems to be connected normally.
so is there a way to have it instant arm rather than having the 5 minute countdown?
I’ll need to double check but I’m sure I have just a basic internal sounder like the pic I’ve attached wires to the board on the Spk terminal and 0V connection next to it. The external bell is connected as per normal to the 5 terminals on the board.
I’l go along later and take a photo of the...
Hi, I have a premier elite 24, I have set it up to auto part arm at a designated time everyday.
But 5 minutes before it is due to set it seems to start a countdown sequence which is a low tone beep. But it’s comes through the external speaker connected to the panel and also the external...
My lock screen just does the normal notification sound.
I've been playing about with this tonight, i've setup email notifications for a user, then on my iphone i've put the texecom email address that the notifications come from as a VIP address. Which then allows me to setup a custom...
Hi, yeh I already get the Alarm triggered alerts, when I click on the alert sounds in the app it only lists Standard or Texecom, but both are just 1 simple quick sound, ideally a longer lasting clock alarm style idea
Got a premier elite setup with smart com connected, all working as it should, get all the usual notifications etc...
My only gripe is that when an alarm event is triggered, I only get the normal 1 simple notification, I’d of thought there should be an option to have an alarm or tamper alert to...