Recent content by josswallace

I am going to build a simple stand to house sky and BT boxes with a tv to sit on top. I would use pine from a local B&Q but would like som advice on creating the white finish. I could of course use gloss paint, either oil or water based but want some advice on using either a white dye, or a...

Does any one know where to get wall fixing brackets with less than 60 mm protrusion

Thanks for your reply. I am not sure how to ascertain who paid for the fence. According to the nehigbours on our other side the previous owners of our house paid for it. The fastenings are on our side and the entry in the Property Information Form whaen we bought the house indicates that our...

We have obtained planning permission to build a ground floor kitchen extension to the house we have recently bought. The extension is within the permiteed levels for a ground floor extension and the planning permission was not objected to. We now have a problem with our neighbour in that he...

Thanks a lot, I think that's resolved my problems.

That's the point I don't really understand. The ST6100 controlling the boiler has two start stop times but unlike the controller in my old house it does not appear to allow the user to set the central heating and water separately.

So it really like having 2 boilers one for heating and another for water.......Is thgat right.

We have just moved into a new house which has a Wocester Boiler in the utility with a Honeywell ST6100A timer with two time zone options but no option for dealing with cental heating and hot water separately,ich I am quite capable of programming. The boiler provides hot water to the central...

The part is obsolete so is not easy to source, especially if you dont know the proper Honywell number. A google search on the Glow Worm part number 800869 returns at least two different honywell part numbers.

Below is a reply from one supplier and I have had numerous so the queris in my original submission are still relevant. Gas Boiler Parts [[email protected]] Good afternoon, Unfortunately the part is obsolete. We were notified back in December 2012. Regards GBP.

We have now determined that the problem with my Glow Worm Fuelsaver 100 F is the master solenoid in the Gas Valve. The Glow Worm part number is 800869 but it is not 100% certain what the full Honywell part number is although according to Glow Worm it starts VR4601. If anyone can tell me what...

I have now unearted the Fuelsaver 100F service Manual and the fault finding instructions are compleetely opposite to the advice in the last post. They basically say that if the pilot lights and no spark continues then its either the PCB/Sequence Board or the gas valve depending on the voltage at...

I know this is an old boiler but we will be selling the house next spring and the cost estimates for replacing it are prohibitive. The boiler intermitently does not light. Sometimeds in the morning say the radiators will be cold, the pilot light in the boiler is lit, but the main burner has...

Gloworm Fuelsaver 100F

When the boiler is working properly, it will swith its self off and then re ignite when it cools down. Sometimes however when it reignites it sparks for a while and the pilot ignites but the main burner does not cut in. It sometimes does this from cold as well.....when I came downstairs this...