Madrab's latest activity
-
Madrab replied to the thread Water pressure mystery!.You'd think I'd know better after being here for so long but sometimes you don't expect it from some ...... ah well, moving on swiftly. -
Don’t let him Troll you. He’s renowned for it
-
I have started asking gemini for answers to Plumbing issues for shiits n giggles. It gets some right and some wrong which is fine for...
-
Madrab replied to the thread Water pressure mystery!.Calm down - :ROFLMAO: like I let this place get me agitated after contributing here for so long and still here. I'm simply replying to...
-
Madrab replied to the thread Water pressure mystery!.Oh Shut up @denso13, absolutely no need for that. I have been contributing to this forum well before AI was even a thing. Whether you...
-
Madrab replied to the thread Water pressure mystery!.A water toby is typically the stop tap valve in the street. The pressure reading taken at the stop valve in the street will be measuring...
-
Madrab replied to the thread Water pressure mystery!.What kind of pipe comes into the house? Is it blue/black plastic or lead or some other pipe? Losing 0.4 bar from the street to the...
-
Madrab replied to the thread Will a Flexi pipe seal on this please?.With taps, the tradition fitting was either a copper tap connector and fibre washers tho some older taps also had a fluted edge to take...
-
1. If you are talking about connecting to the threaded tap shank there is enough flat surface for the connector seal to sit on. Should...
-
Madrab replied to the thread Will a Flexi pipe seal on this please?.They are multi fit, they will take a flexi rubber seal fit, a tap connector/fibre washer fit as well as a compression/olive fit. With a...
-
Madrab reacted to Razor900's post in the thread Can I reuse a valiant ecotec plus flue and plume kit? with
Like.
@dilalio you could pop to Wandsworth couldn't you? Its only two hours max. Oh and losing your gas ticket.... -
It is now sealed up with OB1, without the pad that came with it, and seems to be OK. OB1 claims to cure in the presence of moisture and...
-
Madrab replied to the thread Leaking toilet inlet isolator valve.It would be more this bit, the female end of the flexi pipe that connects to the inlet of the fill valve under the cistern, you may want...
-
-
Madrab replied to the thread Leaking toilet inlet isolator valve.It could be one of the 2 things, they would need 2 different approaches. If you know what you should be looking at without seeing it...
-
Madrab replied to the thread Leaking toilet inlet isolator valve.Looks like it's dripping down from the fill valve up in the cistern. Whether it's leaking past the seal on the fill valve itself or from...
