Recent content by MeRon

Not 100% sure that is what you wanted but I can edit it if required.

Using a keyswitch function without a key switch i.e a push button or a relay, works just as well. The following is referring to Wintex 8.2 on my Premier Elite 48, Zone 20 (N1 E2 Z4) on a wired Premier 8XP expander. My Alarm is based on Areas (groups of Zones) rather than individual zones and...

Yes I would be happy to help anyone what do you have in mind?

Brilliant reply Your interpretations are generally correct. The only thing that wasn't definite is why I reverted to the incorrect wiring. My misunderstanding due to the non confirmation of my initial drawing. My apologies for that. So the good news. It is now wired correctly on the expander...

I am sure you are probably correct in saying that it may not be wired correctly and that is the most likely reason for it not working. I am confused by your references to a 24, internal expander and 33k. I do not have any of those so I assume you are referring to differences from my 48, my 2 x...

Difficult to use a meter as there is a 1.4vdc across the zone contacts. After several attempts with different settings in Wintex it seems that being active or secure is random. Which makes me think of electronic floating signals that change with the wind. Maybe that is why the resistors are...

Zone set to NO, showing active, cable Open circuit, 7.08K. Tamper linked in expander. Zone Set to NO, showing active, cable Closed circuit, 2.19k. Tamper linked in expander. other zones showing 2.25k or 2.19k. OOPS! sorry about the large canvas size in the pic.

Thanks for your interest. Probably more explanation is warranted. My system is based on Areas and the Foyer principle. When I go to bed I use a part arm suite ("Going to Bed") to set area B "Perimeter". Obviously my interior PIRs (Area C) should not be armed as I have to pass through different...

I have a remote controlled sliding gate on the road side of my driveway. It is a busy narrow road and on a bend so a dangerous spot to wait and reverse onto my drive. Almost two years ago I fitted a 4 channel 4G remote relay box, a DL4 -WLTE-EC so I can voice activate it from my car when I am...

Guys, thank you for your inputs. All fixed. sparkymarka I puzzled a lot over your comments about multiple areas especially as it all worked on my older panel and 2.11 firmware. Ultimately you were correct in that I did not need to have multiple areas or C2A for the chime although the chime...

Thanks for taking the time to reply. Sorry for not being more explicit but you got it anyway. Yes, toggle on/off. I did setup two instances of wintex side by side using an old backup and the current one. The old one was on firmware 2.11 the other on 6.# but I haven't manage to spot any...

Yes another Chime question:giggle: It has been working great for years and I recently replaced my Elite 48 panel and added a Smartcom as my comip wasn't playing anymore. After getting it back together I found that I couldn't just press the chime button on the keypad to silence it temporarily as...