Recent content by mikeF00

  1. M

    Ceramic soil pipe near the surface

    Hi, I have a ceramic soil pipe in my garden which can’t be moved deeper or to a different location. The problem is that it’s close to the surface of the soil ( about 4 inches )for about 2m of its length in area of the garden which will get a bit of traffic in the future. I’m trying to find a...
  2. M

    Sleeper retaining walls

    Good point.
  3. M

    Sleeper retaining walls

    a plastic membrane on the soil facing side of the wall would help as well, right ?
  4. M

    Sleeper retaining walls

    Hi, I’m thinking about building a retaining wall (about 2 fr high) using wooden sleepers. I guess in time the sleepers will rot? Does anyone know any tricks to prolong their life?, and how long should I expect them to last? Is there a certain type I should use ? Cheers Mike
  5. M

    damaging a ceramic soil pipe

    Hi, im putting in some new footing around an existing old ceramic soil pipe. i've been advised not to encase the pipe in soil pipes in concrete (albeit only whilst it passes through 200mm thick of footings ) and try bridge over it. However, i've noticed the pipe has old mortar stuck to it and...
  6. M

    Exposed copper pipe for garden tap

    Hi , never heard of this?- can you elaborate? Is this an ‘off the shelf’ product ?
  7. M

    Exposed copper pipe for garden tap

    No, not really. I’ll try the insulation that claims to be weather proof. This may help if I get caught out by sudden frost. Otherwise , I’ll try to be more vigilant and drain the pipe
  8. M

    Exposed copper pipe for garden tap

    Hi, I have about 2m of exposed copper pipe on the outside of the house leading to a standard garden tap. I have an isolator valve on the inside of the house so I can drain the pipe in the winter. However , this is not fool -proof as I got caught out by a frost when the pipe was full of water...
  9. M

    Hot tap taking ages to get hot.

    Kitchen has not changed( monoblock). New tap is also monoblock
  10. M

    Hot tap taking ages to get hot.

    Good idea. I actually fitted an isolator just after the point where I tapped into the old kitchen tap pipe. If my problem goes away when I turn off the water at the isolator then I know the new section of pipe is my problem. If this is the case, I’m still not sure what I do next ?
  11. M

    Hot tap taking ages to get hot.

    New tap is mixer tap and so is the kitchen tap
  12. M

    Hot tap taking ages to get hot.

    Combi boiler , and the kitchen tap used to provide hot water pretty quickly before I added a tee(to provide hot water to my utility room). It’s got to be related ,right?
  13. M

    Hot tap taking ages to get hot.

    Hi, I have an unusual question. When I switch on my hot tap, am I right in assuming that the hot water will be delivered solely to my hot tap? even though the path of the hot water may pass through multiple tee’s on the way (which will have cooled water at their other connections). I expect the...
  14. M

    vapour lock barrier

    Hi, I'm creating a utility room ,and on one of the walls im fastening some plasterboard on to wood battens (and insulating in between the battens ) , The battens are in turn fastened to a brick wall. Should i still put up a vapour barrier on back side side of the inner plasterboard.? I'm...
  15. M

    patio drain

    Hi, i plan to lay quite a large patio ( 9m x 2.5m) soon, and i was wondering what draining system i should use . Any drain would have to be along the long 9m length though. Which should i consider?. How much should it slope by? - I've read it's 1/8" /foot., which means from one end to the...
Back
Top