Recent content by PWR

Could save you ££££s if you can plug into your neighbour's sockets. :lol: Seriously how about boxing out the front of the breast to give you the depth. If it is only 4" you need frame it out with 4x2 at front (and on sides if it needs balancing visually), plasterboard, done! One other thing...

That mix sounds like it is down to sand not being washed, ie still has a lot of clay in it from pit, cheap normally used for blinding over hardcore not very good for building.

i had this installed in my second house about 9-10 years ago. I think from Ideal home exhibition. i don't want to put you off, it looks good new but If you plan to put a car on it be carefull not to turn wheels too often when car is still as it rips up gravel and you will be left with bald...

Solid wall (concrete) its a small 450mm rad that's coming out of the hall and going into the kitchen. I connected up the valves onto the rad fitted it to wall first, and with a small 15mm copper bend to give me a mark where to drill. It all lines up fine, just need to join it up.

thanks Kevplumb much appreciated :D

I want to add a radiator to my system. Looking at other posts I think I have a 1 pipe system (combi) all inputs Therm valve sides connected to one pipe (flow) and other side to another (return)? does this sound right.Can I just 't' off from these pipes, through floor through 4" wall to new...

So a switched FCU 3amp (converted from existing un-used single socket on ring main).75mm cable from this buried under channel feeding wiring centre. is this OK as its connected to an existing ring or has it got to be an RCD FCU to comply with new regs. Sorry for all these questions.

only really looking at 6-7 neon tetras and a loach for the size it is, just for a bit of moving colour. I used to breed Oscars years ago..tanks all over the place I promised the wife we wont go back to that!

I was hoping to bury cable behind some galvinised channel, earth connected in FCU socket terminal and looped to the earth terminal in the box. Fuse board has MCB's only. As for the tank its' really only something different/decorative. It holds about 16litres. It hangs on a wall bracket...

Im going for the switched FCU as tank is to be hung above fireplace (don't want cable showing as I will bury it in conduit..already have three sockets in dining room so wont miss this one This is where it will stay till we move.

Thanks for that. :D

Thats exactly how you describe it, a wiring centre. The tank has a round black glass frame (square tank behind it) and It looks like this connector/wiring centre screws to the wall hidden behind the top of the frame. I want to know if I can run the power to this wiring centre from a single...

Your right, the pump,filter thermostat and light all are fitted with plugs, the strip connector switch unit (to me) looks like they can be wired to it and be fed by mains. I will put on a few pictures when I get home.

Looking for some advice, I have a fish tank/feature that hangs on the wall. The fitting instructions are pretty vague. It comes with a connector strip unit (that has on off switch and terminals for the pump,striplight,thermostat and mains power input. Could I replace an unused single socket on...

The fuse board is a Wylex, looks quite old. (post picture later when I get home if you still need to look at it) six mini trip switches 2 6A, upstairs + downstairs lights, 2 16 A, 1 empty, 1 feeding old switch for a removed boiler that will be taken out. And 2 30A, 1 is a ring for the...