Recent content by Robertr6500

Your right the grout lines are about 1/2 mm to 1 mm I think they are to small so the only solution is probably to use silicone sealent

The grout lines are about 2 mm,I think maybe they aren't wide enough / correction 1/2 mm to 1 mm

Hi guys in need of some advice please I tiled a bathroom about 1 year Ago and the grout between the wall tiles and tiled floor has cracked all round.i used Mapei anti-mould flexible grout and the house is about 10 years old. Should I just rake out old grout and try again or use something...

Thanks greenie that makes it much clearer

Hi guys would appreciate a bit of advice as to how to wire a new light. As you can see in the pictures the new light only has three terminals, so would like your help with which wires to put where, I know the photo isn't great but would appreciate any help thanks in advance

Hi how you doing I notice you seem to be very knowledgeable on all things building wise and would be gratefull on advice about where to purchase tiling adhesives and grout in the londonderry area but not b and q thanks for any reply

Hi I've just moved into new house which is 7 years old and the bathroom needs updating it has painted walls which I think is just magnolia Matt emulsion which has peeled badly above the shower which I've scrapped off back to plaster so I now plan to tile have way and paint the top half and would...

Hi guys I changed the immersion heater switch to a stainless steel one which had the same terminals as the one I took off but when I turned the power back on the light on the switch stays illuminated whichever way you flick the switch,would appreciate any advice, thanks in advance

Thanks for your advice guys appreciated

Thanks for the replies I'll sort the bare wire when I change the switch.the new switch doesn't have the terminals for the two small white wires but it still has a light on the front so do I just connect the other cables as normal thanks

Hi I've just moved over to derry/ londonderry area would anyone know where I can find a good supplier of tile adhesive. Thanks for any replies

Hi guys need a little advice on replacing cooker switch with a new chrome one but on the switch I'm changing there are two small white wires in the middle of connections as in picture attached but the replacement switch has none,does this matter when replacing.ps I am in Southern Ireland thanks...