Recent content by sammpennington

  1. S

    help/information on moving gas meter

    9Hi I am renovating a old bungalow, the meter is located on the inside of the property, who would I call to enquire about getting it moved on the outside of the property, I know building regs are that on new build they are to be located on the outside of a property, the incoming gas pipe would...
  2. S

    Any Floor layers needing two part latex?

    Tilemaster super flow 30, 20kg bags with liquid to go with it 35 bags available going very cheap!
  3. S

    Laying engineered herringbone on chipboard

    Hi I have chipboard floor and am wanting to lay engineered T&G herringbone flooring I have a very good flexible glue to stick the floor down with. The house is timber floor downstairs do I need to prime or DPM the chipboard before laying and glueing the floor down?
  4. S

    Bungalow floor plan advice

    https://ibb.co/X3SRPh5 https://ibb.co/CJ6xkcz https://ibb.co/j8Nn3Jm Hi I have purchased this bungalow, I am wanting to put a 2m extension full length of the house on the side and the roof will tie in similar to one of the photo showing it. The side of the house will come out to tie into the...
  5. S

    Any bungalow project threads

    I have just had an offer accepted on a bungalow. I am planning to flip the property just wanted to see other project builds for ideas. I will be posting my own thread to the build on here expected to get keys by the end of the month.
  6. S

    Garden planning

    Could someone give me advice on planning my garden I don’t want to spend over 2k as little as possible to be honest but would like it to look nice. It is small around 18m long by 8 wide it slopes of and is really out of level. I will attach photos the tree at the back can partially go their is...
  7. S

    Carpenter help to router or jigsaw this accurately

    Thanks for the reply, as for drawing it out what’s the best way to set this out I was thinking of drawing circles some how to create parallel sides.
  8. S

    Carpenter help to router or jigsaw this accurately

    I am wanting to make three sides to form a some what box to place a sand tray inside. Measurements are going to be 1010mm length x 610mm in height. I am wanting to get this accurate but am unsure on how to make a template to router it or to jigsaw it after setting it out. Any help is...
  9. S

    Carpenter/joiner help on how to find a angle

    I am wanting to build something very similar to this out of 18mm ply I am wanting to know how to find the angles to cut the ply for the roof top pitch and also where the roof will meet the side walls the back will be a piece I put in after and just pencil round once the roof is on. Help would be...
  10. S

    Electric Shower advice/help

    my boiler is getting on a bit I do want to change to a combi but cost is a factor at the moment this is my first house. I may look for a electric set up with a good sized head.
  11. S

    Electric Shower advice/help

    Hi all, I currently have a electric shower that is about 10 years old and the thermostat has given up, I will be replacing my bathroom soon and ripping it all out. I am wanting to replace the electric shower with a normal shower on a three way diverter valve (one control for temperature the...
  12. S

    Private Plate Value....

    Hi thank you for your replies, thought there would be a few that didn't like private plates. Think I will list it on Ebay for £300 bid and see what happens.
  13. S

    Private Plate Value....

    Hi All, I own this plate - Y44 EAH Wondered what value you think it's worth?[/IMG]
  14. S

    Bathroom extractor fan Help

    Thank you for your help I am going to inspect the existing fan and ducting in the loft and probably re duct and replace the fan the existing fan is a pull cord but has a main switch on the outside of the bathroom wall but it near the ceiling.
Back
Top