hotpoint WML540 = NOISY!!!

zarni · 1 Sep 2012

Hi,
my washing machine has decided to sound like a jet engine taking off, when on the spin cycle.
It sounds like noise mufflers have been removed.

i have checked the concrete weights, they are secure and no sound of knocking, the WM is level.

any thoughts?

Zarni

zipper · 1 Sep 2012

//www.diynot.com/forums/viewtopic.php?t=52827

spud1962 · 2 Sep 2012

Open the door, cup your hand up against the chassis and with your fingers, push the drum up.
If you can feel a little give/movement (other than the normal circular movement) its very likely the bearings may have gone and will need replacing. Crap bearings is a great way for HP to make a wm last just long
enough for the warranty to expire.

zarni · 3 Sep 2012

thnx for the replies.

Is it a straight forward job to replace the bearings?

Zarniwoop

zipper · 3 Sep 2012

Not possible to change the bearings. It has a welded tub & can't be split, you have to buy the complete wash unit. At nearer £200 it wouldn't be economical. Best advice.....as long as it doesn't keep you or your neighbors awake run it into the ground then dump it in a skip & buy a new one.

spud1962 · 3 Sep 2012

I would agree with zipper.

You could try these people to get a fixed price quote, but
no guarantee 2 days after the repair, the main pcb will pop!

http://www.repaircare.co.uk

captaincaveman1 · 3 Sep 2012

The only thing i'd add on zippers sound advice is avoid hotpoint/indesit in the future if you want longetivity also avoid stuff from china check rating plate for origen dont realie on the make

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

hotpoint WML540 = NOISY!!!

Similar threads