- Joined
- 8 Oct 2016
- Messages
- 5
- Reaction score
- 0
- Country
Hi there,
Hope someone could give me some advice.
I am going to replace an old Legrand 498 90 with a Salus RT500RF Box
The current thermostat has 3 wires as shown in the picture
The Salus box has 4 connections
1 - NO - Normally Open
2 - Com - Linked Live Feed
3 - L - Live Feed 230 AC
4 - N - Neutral
Currently the old thermostat is not working so good and is placed in the coldest part of the house thus the heating is constantly on.
I am wanting to replace the old thermostat is in the hall with the salus box and then use the remote room thermostat in the living room to have more control over the heat in that room.
Could someone please look at the picture attached and advise and which wires go where.
I have isolated the power already and am awaiting you expert reply.
on the old Legrand thermostat
1 - Thin red wire
2 - Red wire with yellow end
5 - Earth - Yellow/ green wire
Thanks in advance
Hope someone could give me some advice.
I am going to replace an old Legrand 498 90 with a Salus RT500RF Box
The current thermostat has 3 wires as shown in the picture
The Salus box has 4 connections
1 - NO - Normally Open
2 - Com - Linked Live Feed
3 - L - Live Feed 230 AC
4 - N - Neutral
Currently the old thermostat is not working so good and is placed in the coldest part of the house thus the heating is constantly on.
I am wanting to replace the old thermostat is in the hall with the salus box and then use the remote room thermostat in the living room to have more control over the heat in that room.
Could someone please look at the picture attached and advise and which wires go where.
I have isolated the power already and am awaiting you expert reply.
on the old Legrand thermostat
1 - Thin red wire
2 - Red wire with yellow end
5 - Earth - Yellow/ green wire
Thanks in advance