Keeping legs crossed...

ban-all-sheds · 26 Jul 2004

How long would it take a plumber to replace a toilet?

And once done, would it be usable straight away?

AFAICT, no special problems regarding access or fitting, but the cast iron pipe that exits the pan thru the wall to the stack also needs replacing.

taydo · 27 Jul 2004

Is the stack also cast Iron.

To change the Loo should take no more than a few hours. I always screw toilets down so they can be used staight away. But you will have to ask your plumber his intentions as a lot still bed them in cement on the ground floor if its a screeded floor of course.

keyplayer · 27 Jul 2004

Can the pipe not be cut off flush to the wall and a push fit used? If so I would have thought 2 to 3 hours, and yes.

breezer · 27 Jul 2004

perhaps you could "limbo" and aim carefully

ChrisR · 27 Jul 2004

"but the cast iron pipe that exits the pan thru the wall to the stack also needs replacing."

Alarm bells ringing - WHY does it need replacing?
If it really does, you'll probably end up with a completely new, plastic stack. (Use Terrain not Polypipe, which weathers black to grey horribly.)

ban-all-sheds · 27 Jul 2004

taydo said:
Is the stack also cast Iron.

Yup

To change the Loo should take no more than a few hours. I always screw toilets down so they can be used staight away. But you will have to ask your plumber his intentions as a lot still bed them in cement on the ground floor if its a screeded floor of course.

Nope - upstairs, wooden floorboards.

ChrisR said:
"but the cast iron pipe that exits the pan thru the wall to the stack also needs replacing."

Alarm bells ringing - WHY does it need replacing?

It's been sorely neglected from a maintenance viewpoint (may never have been properly painted on the underside FAIK), and thick layers of rusted iron are flaking off it. I have not poked at it to see how sound it is, as I don't want to find out the hard way that the answer is "Oh dear, not very, it would seem".

Anyway - from what I've read, if I go for a close-coupled unit, wouldn't the pipe need repositioning anyway?

If it really does, you'll probably end up with a completely new, plastic stack. (Use Terrain not Polypipe, which weathers black to grey horribly.)

I thought you could get adapters/couplers to fit plastic into iron?

Plumber Will · 29 Jul 2004

You can get adapters from toilet to cast also flexible pan connectors are available.

TexMex · 29 Jul 2004

So returning to your original question/s

How long would it take a plumber to replace a toilet?

About an hour.

And once done, would it be usable straight away?

Yes.

ban-all-sheds · 30 Jul 2004

Thanks for all the answers, chaps - they've been a great help.

ChrisR - I forgot to ask - why did your alarm bells start ringing?

breezer · 30 Jul 2004

ban-all-sheds said:
ChrisR - I forgot to ask - why did your alarm bells start ringing?

he didnt shut the door properly

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Keeping legs crossed...

breezer

breezer

Similar threads