Search results

My grannys house I started in September 2010. Nearly finished

Hi I'm trying to decide what oil to get for my wooden kitchen worktops A friend has mentioned Unika from screwfix but I've also found Waterlox from googling things. Can anyone advicse on which to go for. Also, how would you apply it? I'm waiting on the units to arrive from Ikea...

Using my boyfriends page so excuse the lack of sizes I've bought mosaic tiles that are thin. I was hoping to have a row up the middle of the bathroom wall then the normal tiles the rest of the wallat either side of the mosaic We ordered the larger tiles online and it didnt mention the...

Can i fit a single oven in a kitchen base unit (cupboard). can i convert and old base unit which is 600mm wide to hold a single oven.

I've bought a 2nd hand kitchen for my house I'm doing up. It fits perfect but we're one unit short. We'd like a built in dishwasher. Has anyone got any suggestions to what we can do? The kitchen came with a built in fridge which we wont be using, is there anyway to convert this unit to...

HI i lifted my floor boards on which had been raised of a concrate floor by 25mm, it had damp course put down then 25mm wooden battons, kingspan 25mm then sheets of uniply. it had slight marks of mould where the 25mm battons were, i think the battons might have been damp when the floor had been...

we live in the shetland isles. thats way theres no Hetas. what are you ment to do to fit the fire if there not in shetland.? oh the stress.!!!

theres no hetas that can get to me, i'm getting a qualified plummer for the heating side of things and builder to install the fire. i'm building the fire place my self. i know a few regs but cant find anything on materials to be used behind the fire.

it's a charnwood cove 2b boiler. it says be at least 100mm from combustible material so i tought blocks would be ok 100mm away from blocks. maybe not then :(

i'm putting in a fire into my house, i am building blocks up behind it and was wondering how much higher then the wood burning stove i need to go, would 300mm be high enough

hi i am putting in a solid fuel fire, what plaster board can i use around the fire, the sides clear by 300mm the back is undecided, i need to know the needed thickness of the firewall behind the stove if closer then 150mm

i'm

hi i need a water tank for my loft, my indirect cylinder is 1050mm x 450mm, (144 liters i think) would 25 gallon be enough, the tank will be three meters high from ground level three bedroom house

Running wire down kingspan Is it ok how i've done it? I am running wire's from my loft down to the sitting room, i have 100mm of kingspan between joists and 25mm kingspan over the studs then plaster board, i am cut a 60mm inch wide channel kingspan right threw the 25mm kingspan and then duct...

Running wire down kingspan Is it ok how i've done it? I am running wire's from my loft down to the sitting room, i have 100mm of kingspan between joists and 25mm kingspan over the studs then plaster board, i am cut a 60mm inch wide channel kingspan right threw the 25mm kingspan and then duct...

what do you mean fix the cable? sorry bit of a novice, i'm just running the wires a sparky is going to do the rest, could i channel out the inch kingspan right threw, about 2inch wide and duct tape it so the wire arnt touching it, then the plasterboard