Search results

I want to replace my garden fence with 7ft feather edge boards, I want to use feather edge for privicy between my neighbours garden as I have found the previous fence boards butted together when fitted dry out and shrink leaving quite a gap between fence boards. I want the fence to last so what...

Hi I have a dividing wall at the side of my garden, I am overlooked by the neighbours so I want to add some vertical brick pillars to the wall and add fence boards between the pillars, what is the best way to attach the wood to the brick pillars, I dont intend using ready made fence panels, the...

Ok I think what I will go for is a shallow plastic 1 gang surface mounted box and a plastic flex outlet face plate

The markings on cable are 2 x 0.75mm2 and the connection to light fitting is a 2 pin plug type

That looks ok, the cable is 2 core 0.75smm no earth, is this ok safety wise fitting a metal back box in wall as I understand you cannot get plastic ones, dont mind chopping out wall to fit box Cheers

The cable coming out of the wall is already connected to a small cabinet type strip light so I dont want to fit something to the wall that needs a plug fitting, I just want some type of connection unit to fit flush on the wall so it looks a proper job Cheers

Thanks for reply, what should I have then as I dont want to leave it as it is, looks proper cowboy ?. Cheers

I am decorating the kitchen and there is a cable coming out of the plaster in the middle of the wall which supplies power to a small kitchen unit light which is on the lighting circuit. I want to tidy this up , what are my options can I fit something like an fcu on the wall, I would like some...

Thanks again guys :)

Ok thanks guys for your help. I will contact tech dept and see what they recommend Cheers

Glaze can be matt. Ceramic tiles are usually glazed. Cheers Richard Ok so you are saying there is nothing on the market for sealing ceramic tiles Cheers

Not really, they're glazed so are already sealed. Cheers Richard They are not glazed. They are mat finish Cheers

We have white ceramic riven tiles on the kitchen floor which are hard work to clean, currently using brillo pads, but they pick up dirt again quickily, Is there any product I can use to seal the tiles after cleaning which will last ? :)

Hi guys I have a rothenberger super fire 2 blow torch, I have some 8mm copper pipe to solder and want a smaller burner tip than the one fitted, What options do I have and what is available to fit this torch. Thanks :)

Well no joy in pulling old faulty alarm cable through, it parted, so I will have to remove laminate flooring in bedroom, to feed new cable in, but thats a job for another time, so I have taken that zone out of use untill the flooring is removed and that will not be any time soon, and have...

I was measuring the zone alarm terminals in the panel for zone 5 , yellow and blue wires disconnected at pcb in panel

Not yet. I intend to do that next. Will let you know my findings

Yes there are 6 wires in the cable to pir but the two tamper wires are not connected to pir

I have got the power back on to the alarm panel , I am back to the original problem now where the pir sensor in zone 5 stopped working, I have disconnected all the 4 wires which were connected , I have parted the wires at the pir end so they are not touching and checked with a multimeter and...