Search results

Thanks I wasn’t sure if the black trap would block the smells so just thought I’d check first - thanks

Also with the suite I have these waste traps for the shower tray. But my issue is that there is no U bend so potentially the smell flowing up the pipe. Have I got the wrong shower waste? The U bend I’ve ordered just doesn’t work as the fitments are the wrong way? Thanks for any advice…

So use the adhesive where the tray meets the floor tiles and fill the void with building sand?

Hi again, does the shower tray need to sit on a sand and cement mix? I originally thought a compacted base of building sand was ok but reading a lot of posts about sand and cement mix? Guessing the mix will stop movement but a compacted sand option may allow movement? Any advice appreciated thanks.

Thanks mate. Yes power was off when I did it. I couldn’t tell which terminal it came out of but a previous reply was the correct one - terminal 4

Hi, I tried the reset, and no change I did the reset on comport, added it back on, and still get the same error message under the notifications…

Ok thank you. Will try this tmrw and update on here.

Yes possibly- if I can find the option!

Hi delete the encryption keys u mean from the app and the panel?

hi again, ive checked the settings (encryption keys) in the app against whats held in the panel and it all matches with com1 set to "1" in Encrypted Ports under UDL/Digi Options, Setup Modules. In Wintex, under Comms, Radio-pad and Com Port Options, there is an Encryption checkbox, which is...

It’s a bit of dried plaster which is now removed.

Thanks will try that now.

Hi I’ve accidently knocked out a wire out the Hive receiver. It’s a dual controller for heating and hot water - but where do I reconnect the wire that’s come out please? Thanks in advance.

Thanks wayners. The bottom is 15mm out so needs a lot adding to it so the 3mm corner bead won’t be anywhere near thick enough? I have a bead to add back in but only when the thickness reaches the screw head if that makes sense? Thanks

Hi Had some boarding and plastering done end of last year but noticed that the corner isn’t a right angle, it’s way off. The plasterer isn’t interested so trying to fix myself. Am I right in thinking it’s best to layer up bonding/multi finish to get the edge to meet the screw heads (screws used...

Hi, thanks for the reply. I’ve put all the ips back in, can do a test call, can control the panel remotely via the app but not sure what I’m missing or maybe it’s stopped working across all comip connected apps? I’ll double check the panel settings from the manual in case I’ve missed it but...

It’s just the notifications really I wana try and get working again? It was ok until I had to get it reset when I had some building work down. Everything else is works fine.

Ah get you. Elite 24. ENG Sw v4.03.00LS1

Hi not sure what I’m looking for on option 4? Put in engineer code, option 7, then option 4…then not sure what else to do from there? Thank

Hi have the texecom premier elite using comip running 8 zones