Search results

Correct 2ft fitting many thanks

Hi any one will this be compatible? https://www.ebay.co.uk/itm/277312926279?itmmeta=01K522GBK74KTZTCHBQW6QF1A5&hash=item4091237247:g:egQAAOSwJbRn~Rk even struggling to get seconds hope some sparky can confirm many thanks

I have replaced starter and new tube no joy hence I conclude ballast it only flickering

Hi Need help to identify where I can buy this Fitzgerald ballast for fluorescent light Google can only identify used ones And in retirement not keen to process the alternative spaghetti wiring I do appreciate it is obsolete perhaps different make? But direct replacement may help me also don't...

Got it ! My bad hopefully on track now thanks

Hi now progressing further need help to identify uPVC supplier link Google has not helped or possibly my ignorance Of new digital world & being solo operater issue I find is the width of the facia board my measurements & needs are Length 5 MTR & Width 500mm ( width is required as getting rid...

Very well spotted that is real problem identified in depth I really should have attended to it in summer but due to personal issues I could Not attend to it & now the weather is not favourable so feel stuck will try & get photos as& when I get tradesman who is qualified to fix The problem once...

Many thanks Got it

My bad the white you see is uPVC( plastic me old school) there is marine ply board beneath which is rotten I think gutter was Not aligned properly hence rain water did the damage to the ply I may be wrong

Hi Wood under extension facia is rotten hence leakage right in corner as highlighted in the photo length approx under a metre Do I replace the rotten part or entire length? Any guess on man hours? So can estimate cost thanking in advance for help Advise

Hi I have done patio pointing & garden wall rendering yesterday area is slowly drying out with good weather today Do I light spray areas at all?? If so when ? Advise / help of procedure is appreciated thanking in advance As I have another area to render Thanks

@freddiemercurystwin Many thanks for clarification you are top man this inflator is also handy as neighbour hood kids come with Bycles for pressure

@freddiemercurystwin Thank you for your help my problem is I need to identify positive & negative in my black wires! Unless I have misunderstood You & you mean positive on the black wire is wire soldered to the metal and negative is the clip wire? Clarification will be Appreciated thanks

Hi need to help retired neighbour on replacement of the adaptor which is linked to tyre inflator While pulling out from the socket it broke worst is both wires are black to replace I need to know which one on is positive & negative is there anybody out there Who can identify from the photo...

Is It actually flashing or flickering? Sounds like it's just the neon, nothing to do with the oven, other than to help state if the switch is on Hi Stuckinarut my bad it is "flickering" thanks for your input

Hi all Socket red light has started to flash past few days it is connected to oven which works Normally as it should do does the socket need urgent replacement ? Does it have Anything to do with oven workings? Thanking in advance for help/ advise Retired ih

John can't run extension as has to cross path! Perhaps I will buy smart gizma & keep handy thanks

sounds like the battery is knackered, or there is some drain on it (is it left unlocked? some modern cars don't switch everything off until they are locked) ) - it should hold its charge for a fortnight Battery only 3 years old to be fair once fully charged after few miles run it does show...

Hi Me in retirement neighbour in retirement her car does not get much used hence I need to give Jump start which is often one jump start & idle say 15/20min it will last 12/14 days then exercise is repeated Battery is D15 varta 63AH ( I am not sure if this info will help) am thinking of...

Hi retired neighbour with seat 2003 with 30k miles petrol 1.4 manul has Abs light on dash board another kind neighbour borrowed vag com reader But not getting anything on the reader " unable to communicate error" He also tried with couple of old readers he had but none would respond Any advise /...