Search results

just to add you will probably run out off 35 to 45mm screws as most screws needed will be through say 19mm into side timber

havent got a clue but assuming they are using around say 19x38 mm timbers and dependant on assembly method would assume say between 18 mm for metal plates to perhaps 35mm for through 19 into other timber so a set from 12mm to 65mm would cover every thing as you do have the set dont use any...

just a though it seems to be a single pot that is centrally placed on the i assume applying to a single property stack so to me suggests a on the edge on the boundary

other thoughts is there any staining under the roof planks further up the roof slope my thoughts may be water getting under the felt further up and mostly finishing up at the bottom and because the roof is so shallow it just tracks back into the wall

you automatically tend to pivot at the newel and as you swing round not only is there no step and nose to give you a safe even path to the side you have a massive trip hazzard with the string crossing where the tread should be

can you show an actual picture off the felt end compared to the gutter my thoughts dpm tucked behind the felt to extend into the gutter

i assume you mean this stuff ?? its what i used on part off my shed vertically random link https://www.ebay.co.uk/itm/114820482215?var=0&mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338590836&toolid=10044&loc_physical_ms=247643&customid=951266043cba1af937130f73d0bf94e5

you can not use any fixings other than through the face with large washers as the cladding has no real surface strength and not suitable for blind nailing for the same reason so adhesive off some sort the choice the tongues are hollow as ar the whole panel its your choice really but with with...

soffit boards are pretty much water tight as they are a good fit with a 12mm overlap lip at the back and iff a close fairly protected surface would expect virtually no penetration if you are talking horizontal then a minimum 9mm baton vertical screwed /nailed on say 25mm wide every 400 to...

you have to be careful it used to de "iff the tv is capable to receive broadcasts via the aerial" you "will need a licence" based on the ability simply to receive live tv but with you needing to be caught with your pant down but now its more clear with the simple fact that" you can" being...

i use duck duck go yes you get personalized adverts but they dont retain any information beyond your visit [i dont get any adblock plus]but i 100% egnore the first few listings as they are adds i dont give my location so searches are around slough/sutton /wimbledon /woking so somthing must...

i am perfectly happy to chip in the around £3 a week for my licence as my state pension will have gone up by around 28% in april over the last 4 years as my increase is being paid for by the youngsters behind me that cant even afford a house :unsure:

general comments you should only ever have vertical surface and these should start protected at the top and finnish overlapping all timber so it can only shed on the ground you have 3 ledges, one above and at the bottom off the glass the plastic strip at the bottom is also a trap point a small...

from memory a tramway means underframe protection for mainly street running for greater street protection around streets light railway will include street running in prescribed manner where highly restricted speed and extra protection are required on the street perhaps walking speed where as...

Ego massage is the only way to get anywhere with trump iff you have next to zero bargaining chips with the nutty one

an award is very specific and can only ever apply to the person it pertains to the actual symbol given to symbolize the award it is not the actual award it is no more than a physical representation to say a specific person is worthy and we give a pointless physical emblem to display we value...

reading the title off the thread it looks a bit inaccurate, i suspect the actual number will be sub 5% perhaps 1-3% as most people have no to zero perhaps even less interest in what people who do not represent them in day to day living do ;)

the problem you have is you have a dish not suitable for frost that has fractured it will never be suitable for frost yes you can glue it back together but you havent changed it inability to cope with frost you can keep repairing until it no longer cracks but the fact perhaps 20% is still old...

not sure where the theft is as all power is being paid for ??

there is a float that raises with the fluid and physically blocks the tube noted by the motor tone changing you can replicate this by removing the tank and tipping the body sideways allowing the suction to close the path