Search results

OK, got these tiles up., The origional tilers put plain plasterboad underneath, with a plastic strip from the wall to the bathtub, but it didn't fit properly. I got someone in to who cut the plastic strip off/back, and fitted these 15 x 3 cm border tiles. I have read somewhere that you can't get...

Found on another website but thought I'd share tbis inczze ot works on all nissa s. The airbag warning light comes for 7 seconds, then starts blinking 1 second intervals. 1 turn off radio etc. 2 turn on ignition and wait 7 seconds till airbag light goes off, tben turn ignition off before it...

Oh right. Thanks for that

I have two cracked border tiles? They are between the wall and bathtub, 15cm long and 3cm wide, semi cylindrical. Both have a single crack near the middle. When the tilers did the bathroom 10 years ago, they put plaster board up, then tiled directly onto the plasterboard, so not sure if the...

I noticed the overflow pipe was dripping in the morning and about an hour later it had stopped. I tried testing the ballcock valve by pushi g it down and it returned ok. I could only see one ballcock and not sure if there are two. The central heating system is an indirect baxi bermuda. In...

The door sags down on the left from outside. the grub screws on the spindle needed tightening but i can't get enough tension in the cable by hand. Any advice on how to do tnat? I have taken enough slack out the cable so it doesn't jump but it still sags. Thanks for any advice.

I overfilled my micra and is a pig drain some via the sump plug. I got a large syringe and bought some plastic tube from b&q that can fit down the dipstick pipe and suck it out. Much better as the oil won't come out of sump unless plug iz totally removed, leaving me fumbling about trying to...

Cheers John. I thought about keeping it seeing as other older micras are still on the road. Btw the rattle is still there but used to it now so will leabe it lol. Thank once again mate. ☺

Btw Its got121k on the clock

Hello all. I have a 54 plate micra, valued at £160 on webuyanycar. Anyone have an idea if i sould get another year out of it before anything major goes and what odds of ot lasting another year? Seen 03 plate micras about. Its wishbones and brake discs wete fixed last year. No sure if i...

Will do... Cheers mate

Thanks again burnerman. :)

After investigating a faulty reverse light, I have diagnosed through elimination, a faulty connector on a wiring loom that connects to the rear light cluster. If i get a replacement from a salvage yard, could I splice near the plug connector, or should i go further back, taking the side...

Hi again.. sounds like its from drivers side .. gulp..

thanks.. will have a go! (y)

Hiya Burnerman.. hard to say. I will have to go to work now but will have another look.. cheers mate

I have an annoying loop which has been pulled out on the passenger seat. the fabric is nylon stuff.. can i just cut it or is there another way of dealing with it? many thanks

Nissan Micra 54 plate has a tinny engine rattles intermittently for 2 seconds then stops then repeats steadily. This only happens when the engine has warmed up so could it be coolant related? I have checke for any loose covers etc. any thoughts?

Your right there.. Will have go with the epoxy

yea mate, it's got a slight embossed pattern to it, so near to zero chance getting another one. I wasn't sure if the epoxy glue would yellow in time?