Search results

I bought a dual channel, only one zone. I'm going on what then BG engineer told me when they cancelled the install. Will the Honeywell go back to the boiler to connect together

Hi All I took advantage of the Hive Black Friday offer and bought a Hive active heating with installation. BG came to fit but couldn't fit it as I have a Honeywell CM0970 controlling heating ( cable live and neutral only) and a Drayton LP522 controlling water he said I need multizone but I...

I have an issue with piece of plaster popping its under a plaster nail that hods the plaster board to the ceiling and pops about the size of a 50p piece I have put polyfilla in but as its in the hall way it keeps coming out , what can I do to fix it

Hi All Does anybody know if I can use a Philips hub ( all ready installed for lights ) to connect to a Hive thermostat so I dont have to buy another hub Thanks

Took the trim off another window on the ground floor thats the same as the other one with trim coming off and there's a 1 inch gap between window frame and brick all the way around, surely they should have put expanded foam in it when they installed it. photo attached so far I have put foam...

if there's a gap but I can't get foam in , do I just silicone the edges then put the trim back

HI crank39 Glass and frame was was condensation as heating was on and it was clod outside, I went to suck it up with Kaercher window but it was dead so I just wiped with cloth hence a bit of water left. So basically I need to take the trim off and if any voids put foam in the re-apply the trim...

Hi All My interior wall where the double glazing is attached has started getting damp , i was wondering if the damp is getting in between the wall and the double glazing as there is a small gap on the front of the double glazing , I have attached pictures of interior and exterior

I think it’s mdf based with a covering over it

Hi All I have a grey Nobilla German kitchen with a thin worktop approx 15mm that has 2 small chips in the top of the worktop and i want to fill the hole to stop water getting in and making it worse any ideas welcome please Tia

I need to cover a purple painted wall, do I just put multiple white paint over it ? or use something like Zinsser BIN to cover first. Thanks

I bought a Hikvision kit from this firm. https://www.cctvkits.co.uk klit been very good, quality excellent. I bought a kit from Yale kit from Costco first and it was terrible so I sent it back fro a refund and spent a bit more money. It was worth it.

Thanks, both water and heating valves was loose is that right ?

just the head has been replaced

no heating again , we have had the Honeywell valves replaced twice in 4 years for both heating and water and now again no heating but water ok , tried to put the heating 2 port into manual open but its loose and does nothing, can you help with why it keeps happening

Thanks, I have bought a tin of Zinsser BIN and will use that next week when its fully dry. Will let you know how it turns out.

Hi All I have had a water leak now solved, but the water stains its going to leave are going to need fixing. My father in law used a product before called Stain Stop but it went on quite thick and tbh it looked bad when he put emulsion over it. I have seen a product called Zinsser BIN can I...

I have a drainpipe that runs off my high roof onto the garage roof, never had issue until now. We had a torrential storm the other night and water ran down the corner of my garage inside. the drainpipe points the water not down the lead but across the tiles towards the middle of the roof, is...

Hi, So cartridge changed and aireator checked and clean. It seems it only drips when the tank is firing up to reheat the water.

Hi, Tap is 4 years old , hot cold cartridge has just been changed but my wife says it was doing it before the cartridge change, tap is like this one...