Search results for query: ignore

You're confusing totalitarian ideology with Fascism. Fascism finished in 1945. There's been no Fascist party since. The closest fascist ideology still in existence today is that of the Leftists who would like to exterminate anyone who disagree with them. No, I'm not. Fascism is dead. If one...

No, it's a mistake born of ignorance. Or possibly a deliberate lie. What do you think Fascism is?

...school, I know that many screws are now designed to reduce jacking, but I would rather pre-drill. Sure, it takes longer but you don't have do worry about screwing in, releasing slightly and screwing back down. The old nails- removing them will be a pig. I would screw next to them and ignore...

That's not my opinion, it's a fact.

That's a spectacularly ignorant opinion.

Ignore it. It'll change when the pump goes on & off - that's used for the HW as well as CH. Then the heating of the bits when the HW comes on will raise the pressure a little, and fade off slowly. Next service, get the Pressure Vessel checked.

Cooke & Lewis The brand is Cooke & Lewis If a 16A device develops a fault on a 40A feed, are there no knock on effects?? I guess if the unit just fails - no problem, but if the unit starts drawing (say) 21Amps due to a fault, would this not cause potential overheating inside the appliance...

No it doesn’t. It’s just an oven, connect it to the cooker circuit. What make is it? Edited to add: I’ve looked at the instructions you posted. What a load of nonsense. Ignore them.

Thank god for that, for a horrible moment I thought I may have to pop you on ignore.

It used to be allowed to run two spurs of 2.5 T & E on a 2.5mm ring from any point on that ring or for any cable on that ring using a junction box for example if each one was to a single socket or FCU or to one only such as a twin socket. But that change to 1 twin or 1 single or 1 FCU and I...

Excuse my ignorance but I always thought mosquitoes were like flies, in the sense that they fly into the house and eventually leave. Clearly, they bite too! I’ve been reading that mosquitoes lay eggs and settle in the house. If this is the case, what treatment/devices should I be using to...

Ignore him mate he's a massive troll, he calls a white board a gammon board and a black board a chalk board.....he doesn't mimd racism as long as it against white people, he also doesn't mind animal cruelty as long as only Muslims are doing it... Hes a freak but hes our freak :oops:

I'd position the insulation on the garage side. The plywood is not a requrement but it is something we often fit prior to fixing the plasterboard, particularly in kitchen or utility zones.

Thanks noseall. I think I'd doubled it up on the advice from firapara in reply #6 Get you, so something more akin to this (Ignore gap between 50mm and 90mm PIR that's just my excel drawing with a super thick DPM!): As always I appreciate any advice so thanks in advance.

I dont go any further north as my ignorance only allows me to speak English

Except when it comes to the word "own", then you no longer agree. I'm not sure why you are going on about "household". I accept that in that spec they have redefined it to give it a meaning which is different to the real one. I don't know why (although I suspect it's because they started...

Have a read up on solid Staffy best blues and educate yourself. Or don’t bother and keep guessing. Keep trolling.

Please ignore the forum stirrer. Bricks have faces, which are intended to be exposed. The smooth extruded faces are rated for their intended purpose, the rougher sliced top and bottom are for bedding into mortar.

...but the UK has older, different wiring so it will never work. Even if the instructions were correct, which they aren't, people will just ignore them anyway and plug in loads with huge batteries. People can't be trusted to follow the instructions and notify the relevant bodies as they are...

at the time? when did she become aware?