Search results

Hi and thanks I don’t unfortunately but will try and get hold of one. Trust I would check that the tap is sending current?

Hi guys, I've got a simple 12v water tap that acts as a switch to a water pump. Its failed somewhere and I'm unsure if its the tap or the pump that I need to replace? What tests could I perform to trouble shoot this please? I've attached a couple of photos so you can see what I'm working...

Perfect, thanks for the help. Appreciated!

Ah okay I understand. I'll take another look, I feel like I'm a little closer to fixing before it becomes to late. Cheers!

Nice, thank you. I hadn't considered that! Appreciate the help!

Thanks I did plan to infill, however a flat bit wouldn't work unfortunately due to the curve of the boat. How could I template it? Thanks you!

Thanks - we posted at the same time :) I'm unsure how to template this? I'm in Portrush NI unfortunately.

Hello guys and thanks for the input. I wanted to use stainless burley for strength and ascetics. My plan was to foam fill then glue / paint the steel in over the top. What would be the easiest way to take a mould of this? Thank you!

Hi there I wondered if you could help? I’m looking for a piece of stainless steel to prevent pull through on the winch point of my boat. However I’m unsure how I could form this to match the contour? Is there anything you could suggest? Many thanks, Steve.

Hi there, I would be able to cut the dowel prior or send it through as the other side would be hidden. Did you have any issues screwing into the dowel? Did you pilot it first? Also could I ask what glue you used to secure? I do not think that this particular hinge repair plate would work due to...

Hi guys and thanks for the helpful replies. It is indeed a side panel rather than the door. I was just out near screw fix so picked up a hinge repair plate only to discover its not what I need. (my bad) Unfortunately there is only one side panel as the dishwasher is next. Within the hinge...

Hi guys, the screws have pulled from one of our kitchen doors and I wondered the best way to go about redoing this? I trust a good quality wood filler, pilot into it and refix. However it just looks like a mess and I didn't want to make things worse. Any tips you could share? Many thanks! :)

Thanks guys, I've patched it up with fibre and its done a great job. Will sand off a little and paint today.

Thanks very much for the help guys, I actually had a tub of that in the garage Andy so have given it a go and see how it goes. Cheers all

Hi, not 100% sure on the age maybe 5/6 years max? Its had river use as far as I know.. Thanks.

Thanks Andy its a good idea, I haven't used resin / hardeners before is there a product that you would recommend? Thanks mate!

Hi guys, I'm in the process of re painting a fibreglass boat and the paint on the inside is pretty solid apart from a few splits. Its original been painted on think and in parts has formed a layer that sits above the fibreglass. Ie you can tap on areas and there is a very slight between (if that...

thanks, that’s what I’ll do

Nice, some great suggestion chaps. Appreciated and I’ll try them out

Hi guys, I've got a polished concrete garage floor and I'm getting board of sweeping water out after storing the car. Is there a simple way to add some drainage so it runs out rather than pools? Thanks ;)