Search results

15mm incoming pipe from water main to stopcock. 15mm from stopcock to upstairs cylinder.

Many thx for the speedy response

Hi, Hopefully a straight forward question from a non plumber... I need to change the stop cock under my stairs. I have an unvented system with an upstairs cylinder. Turning the supply off in the street should be straightforward as a new meter was recently installed. My concern is that if I...

My elderly mother wants some handles installing around her bath to assist with having a shower. She has quite a nice bathroom and doesn't want the large white hospital type which she could probably get installed for free by the local council. My question is, what are the best type of screw...

Mine is currently flashing so I need a suitable replacement as E8's are nla.

Hi, I have Aurora Enlite E8 ceiling spotlamps in my kitchen and bathroom. I have never been happy with these units as they tend to fail regularly requiring a full replacement. The unit that has currently failed is immediately above the shower unit in the bathroom and it seems that these Enlite...

I could get the electrician to install a longer cable so no jointing is required. But if my current set up is considered safe then why do this? My house electrics are all pretty new so minimal work was required around the CU.

Seems a bit harsh, all I did was phone an electrician to fit an ev charger. I did fit the cable myself in advance as that involved lifting the floorboards and carpet upstairs but I can see that if the electrician didn't fit it he cannot really sign it off. Although I saved him a lot of work he...

Thanks for the prompt response... I had bought a 10m length of 6mm cable which i thought was more than enough and threaded it through the house to the outside wall. Unfortunately, it proved not long enough to get to the charger and a connection was the only option. What waterproof external box...

Hi, Had a Pod Point EV charger installed and just wanted some confirmation with regard the safety of the installation. I have a 6mm T&E cable running from the consumer unit which is jointed on the outside wall to another high load cable as it goes down to the charger as per the pic. I question...

Thanks guys. As I asked, is the Etec 15R a good choice boiler? I'm aware its budget but should I be going for something better??

Thx guys for the info.... Looks like I may keep the gravity system. Is the Etec 15R a good choice of boiler or should I go for say a Vaillant or Worcester Bosch? Also, as the rest of the kit is 20+ years old, what else should I replace, cylinder, tank ball valve etc? Anything else??

Is £4720 a reasonable quote for a combi and shower or should I get some more prices. The price seems to me more than what British Gas would charge. So, should I keep the gravity system or change to a combi?? thoughts please??

Not sure if you're joking or what?? I liked the idea of a combi as it replaces all the old kit in the loft etc so everything will be new. Also, I thought a combi will be ideal for my small 3 bed terrace. If you prefer just replacing the boiler, grateful if you can explain your reason apart from...

Hi, I live in Eastbourne and have a gravity heating system, the boiler has failed and been capped off by the gas board. I received the following quotes from a local company to just replace the boiler and another to change to a combi. I would be very grateful if somebody can advise me if these...

I guess a question I need to ask is how clean do I have to get the cornice prior to priming and painting?

Thanks for the responses... I'm ploughing onwards and have been scrubbing the soot with sugar soap. My main concern are the plaster cornices which still look pretty stained. I have scrubbed as much soot off the cornices as possible and intend to brush on the Zinsser primer into all the details...

I've had a small fire in my front room which has left the ceilings/plaster cornices/walls covered in dry black soot. I've tried to remove as much soot as possible whilst dry but was wanting a bit of help with what products/methods to use before repaint. The plaster cornices have quite intricate...

I had Aurora Enlite E8 LED downlights fitted in my kitchen and bathroom about 2 years ago as part of a complete house rewire. Ever since, and quite regularly, these units have started to flash continuously requiring replacement. Is the lifespan of these units known to be short or is there...

Thanks for the prompt response. Just to confirm.... The fact that the new 6mm t&e cable is sitting on the ceiling within the void is OK?? I'm doing this work in advance of getting an electrician in to connect to the new EV charger and the consumer unit which are both on different sides of the...