Search results

Hi All!! Thank you for your replies!! After further investigation it seems like a few of you were correct! The lugs on the top are not spring loaded. So, I removed the torx screws on the bottom, bent the metal tabs back into place (I originally thought it was hinged!! Good job the table was in...

Hi! So I went into the loft earlier today and saw this!! How??? Why??? It locates at the top with spring loaded latches! How on earth could this happen? I am literally scratching my head! Also, I can't close it as it catches on the control unit?? Have tried to wiggle and jiggle it but the...

Thanks again for all your replies. After going in the loft again etc, changing the fittings/wiring to 240v G10's would be a nightmare as I'd have to pull up some of the floor in the loft, also replacing all the fittings would be expensive. I'm thinking of staying with the 12v option and...

Thanks for all your replies! Much appreciated! So I'm thinking of just going for 240v because of your replies. Just having a quick look online. These any good? Would they fot the same holes in the ceiling...

Thanks, is this safe in a bathroom though? I thought that the reason for 12v was because of moisture?

Hiya! My bathroom currently has 6 x 20w halogen (GU5.3 mr16) 12v downlights which are powered via 2 drivers, 3 lights per driver. 3 of the lights have been out for a while so after investigation it looks like one of the drivers has failed. These were installed by the previous owner. I want to...

Hi! Firstly... excuse the mess/dog hair.... it's a room not used much and am in the process of sorting it out. As you can see the step edging has literally disintegrated. Anyone know of a similar replacement edging strip? Original looks like pine, has a slight curve on the edge and it measures...

Hi, I have a campervan that isn't used a lot during the winter etc, but I do use it now and again. I have recently replaced the starter battery. (No leisure battery at the mo) Normally when not in use, I charge the battery with a charger ever so often just to top it up. The charger is set up...

Arrived and wired as you said! Perfect! Thank you!

Hi, I need to render an outdoor retaining wall. However the bricks are very smooth (I think they might be engineering bricks) and I'm not sure how well the render would adhere to it. I was thinking of screwing some galv expanding mesh onto the wall before rendering. Or could I score some lines...

Thank you..... yes this is pretty much what I thought. Just wanted verification from an expert. I have seen the same unit wired with the live linked to pin 2..... I'm guessing that because this is a switch it doesnt matter which way pins 1 and 2 are wired?

Hi Guys, I'm looking at replacing my Drayton Combi Stat with a Moes smart thermostat. (The GC model for central heating boilers) As you can see from the pics, I only have 3 wires going to the existing thermostat. The Moes needs 4. I'm pretty sure what to do here with a bit of research, however...