Search results

Brilliant lads especially the programming info sparkymarka ;)

Hi guys, I need to change the access pin number on this door intercom but I don't know what make it is and I don't know how to change the pin. any ideas? thanks

sorry since discovered its a galaxy 48 (g3) programming menu differs from g2 in menu option 63. Told you it was hard to explain! I'll try and get more info. In short when programming users fobs, if I give each fob holder group choice of group 1,2 & 4 all groups can be set/unset together or...

?????o_O

have a Honeywell g3 panel and myself and an engineer are missing something, so any idea's? system has 3 groups on it (1,2,4), problem is we can't program fobs to work on certain solo areas or certain combinations. this is how it's working at the minute: group 1 can't be programmed to set solo...

Thanks for your time 82, much appreciated

zone off soak test and no problems in last 7 days! went into code 21 as eightytwo said above, previously faulty beam readings zone closed 1032 ohms zone open 2006 ohms another working beam (comparison) 70ft away closer to panel reads 989 ohms zone closed 1972 ohms zone open.

Honeywell galaxy g3 ! Beam has been working for over 8 months with no problems. Beam receiver had attenuation led lit permanently which ment fine tuning. http://takex.com/pb-30tk-pr-1754.php To be honest I'm actually a manager on the system but a good bit knowledgeable of the...

Started off with a panel tamper fault on a zone with a takex beam. The receivers attenuation light was lit so I gave it a slight realignment, sorted I thought! (alignment looks spot on through view finder) Coming out of engineer mode it then said zone masked, went through exiting engineer mode...

Couple of good suggestions there lads! Any links for supplier's, was looking at http://hdcctv.co.uk & it's seems a good site.

Hi guys, I want to mount a couple of cameras on the walls of my house. What is the best way to do it without unsightly cabling and junction boxes showing? The cameras come with an 8" cable/plugs.

Hi guys, Whirlpool adg994 dishwasher runs 15-30 minutes through cycle until all the panel lights go out then it just hums. Checked the drainage hole for objects sticking in the pump but I could only go in so far. Any ideas? Thanks

Thanks oilhead :D

[/url] Thanks, that states live to limit thermostat first! I'm just after looking at my brothers but for some reason his is wired live to adjustable temperature first.

Hi guys, I'm fitting an imit dual thermostat on a boiler. Question is do I put the mains live feed on the fixed temperature side or on the adjustable temperature side? It looks as if it should work wired either way but would like other opinions. Thanks

Window opens inwards so not sure about this one but some kind of a restrictor is an idea. Thanks :wink:

I'm confused as to how my fire escape window works! Tilt & turn handle, from closed turn 90° window opens/pivots into room. From closed turn handle 180° window tilts inwards. Might be put in back to front? Biggest problem I have is locking it safely for the kids, because of the layout I...

Thanks that's exactly what I thought & didn't want to hear! I'm always worried about the new holes being close to the original holes, might just give someone a call to do it :roll:

hi guys, I understand the measring part of replacement hinges, I just have one question. do replacement hinges all have a standard hole placement? ie unscrew old hinge and refit new hinge on exact same holes. thanks

One lnb with two outputs! I know the best way is another cable & lnb output but it would be harder. I want the other Box for hd as I'm not paying the extra for hd on sky. One box would be off when the other is on anyway, would spoil the recording I must admit..