have a Honeywell g3 panel and myself and an engineer are missing something, so any idea's?
system has 3 groups on it (1,2,4), problem is we can't program fobs to work on certain solo areas or certain combinations.
this is how it's working at the minute:
group 1 can't be programmed to set solo
group 2 can be programmed to set solo
group 4 can't be programmed to set solo
group 1 and 4 (group choice) can't be programmed to set
group 1 and 2 (group choice) can be programmed to set
group 4 and 2 (group choice) can be programmed to set
group 1,2 and 4 (group choice) can be programmed to set with any combination.
as you can see as long as group 2 is included we have a choice
there are no groups set on area set first in code 63 options, 2 setting logic (option 1 group mode is enabled)
not the easiest thing to explain!
system has 3 groups on it (1,2,4), problem is we can't program fobs to work on certain solo areas or certain combinations.
this is how it's working at the minute:
group 1 can't be programmed to set solo
group 2 can be programmed to set solo
group 4 can't be programmed to set solo
group 1 and 4 (group choice) can't be programmed to set
group 1 and 2 (group choice) can be programmed to set
group 4 and 2 (group choice) can be programmed to set
group 1,2 and 4 (group choice) can be programmed to set with any combination.
as you can see as long as group 2 is included we have a choice
there are no groups set on area set first in code 63 options, 2 setting logic (option 1 group mode is enabled)
not the easiest thing to explain!
Last edited: