Search results

This is a ZIP RCH. Anyway forget the heating element that's not the issue. The immersion heater I removed has 2 other straight rods one is a thermal cut out and one is a thermostat for controlling the water temperature, (see pic Red and Black) there are linked in series. New models seem to...

Thanks for your reply. This product is a twin thermostat but still contained in one Rod. The one I fished out of the water heater had 2 Rods one for over temperature protection and one for heating control. It seems you can only get the single Rod type. The issue is are the 2 Rod type any...

Hi All I need some advice. I'm installing an immersion heater into a Zip water heater. The one that has come out has a dual thermostat (yes 2 rods) that are linked, one provides temperature control and the other provides an over temperature safety cut out. Q: Do these 2 rod type still exist. Iv...

Thank you but I would like them to be editable. I may just make my own

Folks Can anyone tell me where I can download editable EICR Forms please. PDF or Excel would be great Thanks Rob F

Might have gave to copyright it . It has a certain ring to it. I may pop into screwfix and casually ask for a chenobler to see what reaction it brings.

Awsome. The boys will be relieved when I tell them. We had named it a chenobler. . Think I like this name better than a staple remover. Lol

Guys Were doing up an empty bedsit and found this tool . no one knows that this is. It may not even be a tool . It could be a kitchen implement . Any ideas?? 5 tradesman in and no one knows! Help!! Lol

Hi All I'm putting in a kitchen at home. its mostly all in looks good but I need to cut an oak top for the Belfast sink. I don't fancy buying a router and doing it myself and every joiner or kitchen fitter I call don't seem interested (too small a job). So I was wondering is there a place that...

Update: Got the hair Dryer out again and blasted the PCB for 15 mins, and hey presto the house is warm gain! thanks guys... the ear ache has stopped as well funny that !

yeah tried that thanks, just concerned iv not knocked anything but I dont think I have to be honest. Be unlucky if the PCB has shorted even when it was off and Id dried off the splashes, Will leave it over night and cross my fingers

a few drips went into the PCB housing not but was completely off and isolated from the mains before I change the Diaphragm, I checked that everything was dry before switch on. It was off log enough for capacitors to discharge etc, so in theory nothing could have shorted But you never know seems...

thanks Tony, the dreaded PCB. Second house with this boiler type in it and the last house needed a New PCB as well, :(

HI All My Baxi 105e has developed a fault. I was changing the diaphragm the other day, works fine as the pin comes out then the hot water tap is turned on even when the boiler is off. Anyway since then when either the CH or HT water is activated you hear the PCB relay switch on and the pump...

No just clipped into the cavity. Should they be covered?

Hi The plumber has just fitted a new CH system to my parenst bungalow. Boiler in loft and chased pipes into the walls to connect to the Rads. I need to plaster over the chased in pipes (plastic 10mm) Can I ask what is the best plaster to use. Just ordinary plaster our would or recommend...

Hi The plumber has just fitted a new CH system to my parent bungalow. Boiler in loft and chased pipes into the walls to connect to the Rads. I need to plaster over the chased in pipes (plastic 10mm) Can I ask what is the best plaster to use. Just ordinary plaster our would or recommend...

My Zanussi essential washing machine will not turn the drum or allow water intake. Iv changed the motor brushes - but still the same. It will drain fine if you fill it manually with water but wont spin even if left for over 1 hour on the spin setting the drum will not kick in and turn. There are...

Thank you for reply I was hoping that a compression fitting would be available. I was looking at Screw Fix and this code seems to be the ticket 55913 but was hoping this would be suitable for plastic on the 10mm side as that what pipe I have to hand. You thoughts are welcomed thank you

HI I need to joint some 8mm microbore copper to 10mm plastic pipe. Can you recommend a reducer to do this if one actually exists thanks you