Search results

That’s what I was going to do but as I mentioned, the existing alarm is in a very cramped area so my concern is getting the wires in so that they stay put while I tighten the screws. That’s why I was considering the easier way of just sticking the wires into the connector and a quick squeeze of...

Hi. I am replacing a Veritas alarm which has 8 wired zones with an Elite 64W and 8XP expander. The alarm is situated in a very cramped area so I am concerned about transferring the wires successfully. What I was thinking was could I prewire the panel and expander with a short piece of wire on...

Thanks for the info. I have an elite 24 but I’m changing to a 64W with an 8XP to take all the currently wired zones meaning none of the onboard ones are going to be used but I want to add a device to the keypad (it’s much nearer the keypad than the panel) and map the zone to zone1 on the panel...

When mapping the RKP zone can it be mapped to an unused zone on the main panel ? Thanks.

Hi. Just wanted to check that if I want to use either one or both of the zones in the RKP I can use the + and - from the next to the T and R to provide power to the device (a PIR) rather then run a separate power cable? Thanks. Stu

Hello. We recently had a glued lvt floor fitted and want to find a machine to clean it. We were told not to use a steam mop as the heat could loosen the glue and also told not to use a vacuum cleaner as the spinning rollers could scratch the surface. Does anybody have any recommendations of...

If you mean the mesh Wi-Fi system then they are rubbish. I bought a set but had to reboot them everyday so got rid.

Hi I currently have a very old Texecom Veritas 8 set up and I am looking to upgrade to the Premier Elite but I'm not sure if I need all the same kit. At the moment we have the panel hidden away and have 2 keypads. One keypad is in the hall that is used for a full set and one keypad is on the...

Can it be connected to a 12 volt power supply so that it has power?

A cockapoo

He's already kept in one room where there are 2 sensors so I had to turn off the sensors but that means they are off all the time which is why I wanted pet friendly ones.

Can the elite 24 do wireless devices as well? It’s a dog I have, around 15kg in weight. I was looking at the Homeywell basic pir.

Hi I have a Veritas R8 alarm panel which was fitted over 20 years ago and I would like to replace the PIR's with pet friendly ones. The old PIR's have the standard 6 wires as do the new ones. Is it a straight forward swap or will I need to do any programming to the panel? My second...

Just to confirm, as long as I put the sounder onto the battery it shouldn’t sound ?

I presumed that the pcb wouldn’t be separate enough to swap out on its own but I will check this out. Thanks.

Hello I have a Veritas R8 alarm panel fitted about 19 years ago by an installer who is no longer in business and I don't know the engineer code. I considered resetting the panel but saw that the installer may have locked the code so I thought I may replace the panel with the a newer version...