Search results

OK thanks I'll do that.

I'll get some photo's when I go to visit, the tumble dryer she brought with her when she moved in, it worked fine at the previous house.

Hi all, My daughter has just moved into a three bed house circa 1900 that has a consumer unit fitted, her issue is when she switches on the tumble dryer the main switch on the CU trips out but some ceiling lights remain on, she then resets the main switch turns on the tumble dryer and all works...

The cylinder is an in-direct type on our installation, cold tank feed to the bottom, top outlet / vent pipe and the in/out feeds to the water heater ( coil inside ), Cosmic is correct regarding the JANUS 3 water heater as it can be used on both type of cylinders direct & in direct-source J&S...

Thank you for the replies, I was not aware that J&S did combi warm air systems, we were toying with the idea of renewing the original system with a like for like and received a quote of £3500. The original system comprises of the main system built into a cupboard unit within the kitchen with...

We have fitted a J&S warm air system with the Janus 3 water heater alongside both working OK what I would like to know is the current hot water cylinder ( indirect ) is 950 x 450 can I upgrade it to a 1050mm cylinder to give a greater amount of hot water for a larger bath now fitted. Of course...

OK that's good enough for me, I shall take up the Weyroc floor and replace with 18mm ply before tiling.

I flicked through similar threads on the forum and found a lot referencing 6mm ply or similar well fixed down over existing boarding, taking up the existing tiling off the Weyroc floor boarding I have found it fairly sound in condition but springing being a timber suspended floor, I feel that...

Hi Our kitchen floor currently has ceramic tiles over Weyroc floor boarding, I'm aware that a ply board 4mm - 6mm is used traditionally for the tiles to be bedded on using a flexible adhesive but I was wondering if any tilers had used metallic lathing with a gout filler to form a more uniform...

hi, need some help we have fitted a 900 x 450 indirect cylinder in airing cupboard fed from a cold water tank in the loft, this cylinder only supplies hot water to bathroom and kitchen tap it was connected to the gas warm air Janus 3 water heater but was disconnected by previous owner so now the...

You should not be able to see daylight at the eaves, unless you have vents fitted to the soffit. If you can see daylight so will birds looking for a nesting place come spring. Geoffm1066

Thanks LJW61 for the rapid reply, i plan to do ceilings Wednesday afternoon on my day off. Geoffm1066

Hello and help required please On my daughters C5 the drivers internal door handle assembly has come off, any ideas what the screw fixings are that release the lining to get to the inner door skin? I know on older cars it use to be phillips screws but i think thats all changed now. Many...

Hello to all I need to know the best way to tackle over painting two bedroom ceilings both of which have been painted before using a silk paint. I wish to over paint using a matt finish but need a base coat first, any ideas please. Geoffm1066