Search results

ok... whats the difference, indution and ceramic seem to be the same to me???

ive been looking for an induction hob for my new kitchen come across this one but cant find any power consmption details,(anyone know where to get them from?) from what i can gather off other posts you cant use diversity with these which may cause me a problem because ive got my oven running...

thanks for the quick reply..

anyone know where i can find one? I've looked at screwfix b and q, ebay and can't find one. Just put a shower in but current breaker is a 32amp. Thanks.

yes thats exactly what im planning on doing..... i want all the walls smooth so i can paint them then put my new units in

thanks 1john, just so i got it clear in my head. pick off all loose PVA all wall (4:1 mix im guessing from other posts) leave for a day PVA again just before putting bond on. Am i bonding up to the same level as the old skim thats still on the wall and does this coat have to be a...

thanks for the replys..... ive tried taking it all off but i can see it taking forever so im going to knock off the loose and have a go at bonding it in.. any tips or what bonding to buy??

managed to upload pics now... maybe these will explain a bit better... :) there in my album cant get the pics on here???? [/img][/code]

hi all, ill tell you now ive never plastered, and never mixed but im doing my kitchen at the mintue and wanting to have a go. if it goes wrong ill make the call! All of my kitchen was originally tiled so they've all come off and the units are out and obviously im left with patches...

sorry holmslaw... electronicsuk was on the ball with that one. :D

thanks for that... didnt know the correct name for them. ill have a look for a tool for them.

cheers guys for quick response.... i have some single 1.5mm i can use to crimp. just thought id check its not against any regulation on a new installation. while on the topic is there spade crimps availabe that fit into the terminations like what the fly lead comes with originally, went to the...

i have come to a new installation all circuits are rcbo protected, on one of the rcbo,s the white fly lead going to the earth bar has been cut too short to reach its correct position. do i crimp and extend or do i replace the rcbo? thanks

i clicked on the "load drivers" it just brought up the screen to browse through the disc, tried everything on there but there was no drivers to load. so i went for the install instead of repair put the product key in and that didnt want to install either! cant remeber the error message though...

problems! downloaded the recovery program and put onto a disc, clicked on repair computer got to the next step (system recovery options) and it hasnt detected no operating system or hard drive, so no repair can take place... any ideas?

thanks dave ill try it and let you know

my friends vista wont start up.... the first screen comes up with press esc for bios setup del for boot options tab for first screen then it comes up BOOTMANGT missing (presuming it means boot management) press ctrl alt delete to restart then just the same process...

thanks for the quick reply, i had 3 options on start up.. F8 boot device F2 bios setup ESC switch screens it was the ESC key that i hadnt tried, pressed that and it took me straight onto the packard bell recovery program.. Thanks for your help.

im trying to reformat my packard bell desktop pc, ive done it before, just forgot how i did it... its windows xp, ive got the product key of the side of the computer. i thought it was one of the F keys on start up i pressed to get it started but cant figure it this time?? any ideas?

hi there, yes i have tried sending emails to different places and small companys asking if i could labour for them on a work experience basis (but only at weekends as i work away in the week.) but had no reply off any and i dont know anyone personally. i have done my PART P building regs in...