Search results

I cant see how to as there is only just over 1 cm around the door all the way round it was rather a tight fit by the looks of it.I have tried turning it all ways

I have a question as I have just fitted one of these. Havent fitted a door sensor to the front door as there isnt enough clearance between door and frame to fit sensor.Just tested alarm for first time and thought I could use the pir in hallway to set off alarm instead of door contact. Set...

www.106owners.co.uk

just had a look at the mower,its such a job just to see anything,got it up on top of my wheelie bins to try and see as you cant turn it over . It looks like the belt that goes to the little box on the rear axle is all floppy "i guess its not supposed to be like that". How the hell do you...

thanks john for the fast reply,I will check out those points tomorrow

I have got a "typhoon" petrol lawnmower with a briggs and stratton engine.I have had it about 2 months,got it from ebay.Although it was new and packed in a box just had to put the handle on and fill it with oil,but it had been in the box for a few years.so no chance of guarantee.It worked fine...

I am going to look at a cheap 106 diesel tomorrow and one of the engine mounts is on its way out apparently. Has anyone got a rough ball park figure for replacing one of those on this car to see how much I can bid him down.I know its hard to be exact just a rough idea would be great

I have a back door which is double glazed.the top panel is glass and the bottom panel has a cat flap in.I want to take out the panel and get a new one without a hole in it.Just how much force should I use to get the beading off.I have tried levering a wallpaper scraper behing one of the beads...

its called a "soil balloon grating" item number 431-958 from wickes cant post a link to a page. Is this not the right thing then you couldnt point me in the right direction of what i should be getting could you please

My soil pipe hasnt got a cover on it so went to wickes and got a 110mm cover for £2.05 i thought it would either fit just inside pipe or just over pipe but it just sits on top as the pipe cover is exactly the same diameter as the pipe.Is it me am i missing something so how does the cover stay...

I have a cable that has been removed from a socket that had to be moved to make way for a garage door.It works I have just taped it up at moment can I use this and wire it into the new pir security light it has the black red and earth ends on it

thanks didnt think of doing that

I have recently moved and want to put up a security pir light on my garage. Before I have always just put a electrical wire on it and plugged it into a spare socket in my garage.Looking at the intructions in focus I see it says dont wire it into a plug and put it into the ring main socket. Is...

so I would be roughly saving about £150 a year on my gas bill .So over 10 years to payback what I would need to spend.ok thanks for the info

I wonder if any knowledgable person could explain the economics of the rating system on boilers.I have a floor mounted one of these ,looking at the ratings it looks like about 71.3% efficient.If my gas bill is say £500 a year how much would I save by buying a A rated boiler of the same make say...

Has anyone else experienced problems with the light in the fridge of a beko fridge freezer model CA5411FFW.to get the light to work every time you open it you have to touch the plastic thing that opens when you open the door.there is no problem with it opening its just you have to Either push it...

Thank you for the advice just emptied 6 litres out and bent the rod down the level had dropped by over an inch and just turned the heating on nothing coming out of the overflow now BRILLIANT. thanks again

Cheers guys Ill let it cool down and have a go later.Ill probably be on here later saying I now have a pipe in my hand and water is ****ing through my ceiling "knowing my luck"

the valve looks like its not letting water go in as it wasnt dripping out of the valve.How do I adjust the level lower please?do I just bend the rod on the end of the ballcock

I have been up in the loft to have a look,the water seems to be coming from the overflow hole set about half way down the header tank.The heating is off at the moment and the water level is just below the hole for the overflow. So when i turn the heating on the level must rise I guess and...