Search results

I guessed it may be blurb. Will stick with Saniflo unless someone suggests a better one.

I'm knicking that idea with the boxing in. Looks great

https://www.plumbworld.co.uk/grundfos-sololift2-wc1-97775329-19701-25528 this says it has a self clean design

Which macerators have people installed and would recommend? Saniflo are the obvious choices but I've seen Grundfos self cleaning ones more resonably priced.

I'm going to seperate the garage to create a utility room and was wondering if a stud wall can be used instead of block work? If so, what depth should the timbers be and what PIR board to use? I've seen Wickes stud work timbers are 89mm but PIR board is either 75mm or 100mm.

My daughter has moved into a house where there is an existing Rangemaster 110 Gas cooker/oven. The bottom left oven lights but stays on a low setting and the flames don't get any bigger. After doing some searching I found it's likely to be a blown FSD or one that isn't sitting in the right...

I defrosted it this week and left it 24 hours. The coil behind the cover in the freezer was iced up and it all melted before I started it again and thought it had done the trick but have now found that the freezer is ok but the fridge is at 11c and the room temperature is 21c. So the fridge...

Our Logik lfc55w12 is only 20 months old and we noticed the freezer food had started to defrost. When I turn the dial up to maximum it clicks and the compressor comes on and the fridge and freezer freezes everything. When I turn it down it doesn't work and over time the food starts to defrost...

Hi, I layed Polypipe overlay boards about 5 years ago in a 27ft x 14ft kitchen at home. Once you have glued the boards together and layed the pipes. Just tile straight over them using flexible adhesive. Job done. It really is as simple as that.

I cannot get hold of just 1kg of Epoxy grout. It used to be available before by BAL but they don't do it anymore. Does anyone know where I can get just 1kg instead of 5kg?

Does anyone now how to bring back a shine to dull powdercoated aluminium frames? We have a hardwood conservatory with aluminium white powder coated frames and they have lost their shine and are almost powdery.

The house and I assume the rail is about 30 years old. I rubbed it right down to the wood last night and cleaned with white spirit ready for applying a new coat tonight.

I rubbed it down with sandpaper and then just wiped it with a cloth.

I removed and painted a stair handrail with Sadolin mahogany woodstain a week ago and its still not dry but just tacky. Any idea what would have caused this?

I want to put a switch seperate to the main ceiling lights for some wall lights around a bathroom mirror. Is there any sort of wall switch that could be used instead of another pull cord?

Here in the black country basins are wild african buffalos :-)

I'm open to ideas and just want to avoid picking up something that's going to be crap. I bought a set of taps with a kitchen sink once and as soon as the tap is on more that halfway on it splashes everywhere compared to others that seem to keep a nice stream flowing whatever the pressure.

I'm fitting a new bathroom sink soon and want to get some good taps. Any recommendations on good makes or ones that you have fitted that look good and flow nicely. Its a mixer tap that I will need

I guessed as much. How do you connect everything to one rcd ?

Just refurbing the bathroom and need to put in the following Shaver Socket Ceiling Extractor Fan with light 3 x 240v Ceiling spotlights Wall lights - zone 2 Heated mirror pad. I have a 13amp RCD Spur 30mA. How many of theabove need to be powered through the RCD as I'm thinking there...