Search results

Good idea IJWS15 I`ll try that, been on to the previous owners and they say that the top track was a "hanging" track and not a flat track with the slots for the wheels to run in which I have fitted so I`ll be busy over the weekend :lol: let you know how I go thanks

Yeah Just fitted the two mirror doors one on the back track and one on the front track and all works fine, so the problem lies with the wooden doors and how they fix to the track!! they have a wheel on the bottom under the door and a clip at the top on the back of the door this arrangement...

I`ve just examined the fittings, two like clips at the top of the door that clip into the track and two rollers on the bottom, the only adjust is up and down. it seems as if the rollers are under the door at the bottom but the clips are at the back which are pushing the door outward???

Hi I want to fit these doors to the built in wardrobe in the bedroom, I have removed the old doors ect and aquired 4 sliding doors (2xmirror 2xwood) got the track from wickes and installed the track ceilling and floor, put one of the back doors in (wood) and one of the mirror doors but the top...

Hi guys I would appreciate your comments thanks

Hi all I am changing our bi fold doors but the gap is 78cm or 780mm wide and all the products I am looking at are 760mm or 800mm, is there a way to pack the sides so the 760mm will fit? I wonder if a thick bead of silicone would do it. I`ve just read that these bi fold doors are adjustable, so...

He guys I have just finished fitting whole new guttering downpipes and abit of facia board due to the previous fitters installing the fasia over the gutter brackets so I had to take off the fasia but they installed it with nails so the bloody thing broke off. anyway in total the cost for...

Hi No there is nothing in the line of the pir to set it off, but it has been off all summer. I seem to remember somebody saying that there are certain modes the light can go in like holiday mode always on mode can`t remember at the moment anyone?

Hi there Having alittle trouble with my security light, it stays on then when its timed out goes off and then straight on again I have cleared the pir of any cobwebs ect but it still does it any ideas anyone?

As I suspected the flue does need to be sealed to stop the gas getting into the room, You must use fire rope wrapped around the bottom of the flue that connects to the stove and then use fire cement to seal it further the same procedure as for the register plate. :lol:

Hi I have fitted my registery plate and about to fit the flue but I was wondering if the the flue pipe seats on the stove and then you seal it into the registery plate or you have to seal into the stove as well ?? thanks

Hi thanks for the replys, I have a heat gun :twisted: do ya think this would work? thanks

Hi Hope this is the correct section :D I want to remove transfers from the tiles in the bathroom, I wondered if a wall paper stripper might do the job :? any ideas anyone thanks

Hi and thanks alastairreid, I looked at this and found it helped alittle but not fully. Done some more research and found that you switch everthing off connect your cables turn the laptop on and right click your desktop and click properties and display settings and click advanced then displays...

Hi Guys I have a av kit off the bay connected it up and no picture on the tv!! :( Am i doing something wrong :shock: this is the kit I purchased any help please

Thanks for the replies guys The thermostat is in the fridge compartment!! the outside does seem to affect this appliance......... I think I will have to store the beer in the kitchen fridge in future and buy a stand alone freezer for the garage and hope this solves the problem. now its the...

update: sorry for the delay been busy.... here is the new light works fine just go to plant the hedge behind it. thanks for all the advise.