Search results

Thanks for your assistance garyo.....there is no official manufacturers design as yet. its just detailed how i would like it to look. So does the ridge beam running from main house wall to new glazed wall need to be steel or would timber surfice?

Hi i was hoping someone could assist me, we are looking to extend out home and i'm trying to put together some building regs drawings. The building is single storey mainly brick with curtain wall style glazing to the front which goes follows roof slope. Now with the glazing going so high i dont...

It says 10.9KW on the back and 7.6KW and yes measurment/guess is across the grey sheath sticker on back

Hi all please forgive my lack of knowledge, but my wife has just bought and had delivered a cooker that she thought was all gas but turns out the ovens are electric (see photo) Our old cooker which was all gas simply plugged in behind the cooker into a 3 pin socket for running the clock and...

cooker

new cooker wire 10mm

existing 3 pin socket used for previous cooker

fused switch on wall connected to three pin socket

consumer unit

Hi there, I'm in the process of installing a raised deck area in my back yard, from what i have seen on the internet after you fit ledger timber to the perimeter you support the decking joists on metal hangers into the ledgers. Does anyone know what type of hanger to use? the deck joists are...

Oh yeah. Never thought to just bend it out derrrr. Thanks for your help.

So can you get a 22.5 degree bead. I apologies for my lack of knowledge as i thought you could only get 90 degree Thanks for your tips

But surely they are redundant, Like i said the lower one used for venting the floor space is of no good as its now a concrete floor in that room now and the higher one was put in by previous owner to help with the damp inside due to old Victorian house with thick wall no damp course or...

I'd never get a neat edge just by eye and hand, i've render some flat area but never a corner not even a 90 degree corner but i believe there is metal beads for that. Was kinda hoping there was something that the pro's used and i just couldn't find it on the net. what about the air bricks...

Hi I was wondering if anyone can tell me how to get neat sharp corners when rendering a 22.5 degree bay windows corners. It's the brick portion that's painted white that needs tidying up. Also with the air bricks that have been installed at some point to help with damp despite there being no...

Hi, I have an old Victorian house and outside we have the old sandstone style copings with the little stubs of railings after they were cut out many years ago. What is the best way to prep these for painting as I've tried several times using Sandex paint over the last few years and every year...