Search results

Hi Guys Currently working on a school and the service trenches flooded due to burst pipe so we are removing the vinyl and all associated timber and replacing with new on a like for like basis, around 10 years ago the last contractor removed all the access hatches (Nice heavy duty brass ones)...

thanks i will add a closer also

I think it was these i bought...

Hi guys I have knocked through my hallway wall into the garage and in the process of installing a fire door, I have the door 762mm (30") wide fd30 and a rebated fire rated frame and strips also rated self closing hinges, just after some advice on what to set my frame width at and how much space...

Thank-you sir

Hi guys Today's project has turned into a can of worms lol I broke a tile and a ridge tile and struggling to Identify them, my neighbour says he thinks they are a marley but he's not sure, hopefully someone on here can help me identify them Regards

Hi guys I'm just redoing my fascias and soffit and decided to go for the above mentioned caps over my cemented verge, I have cut back my tiles by 30mm to allow the trim to sit flush and reading some instructions it says to remove all old mortar, my question is is this necessary? Can it be left...

Hi guys I have had the house 3 years and finally got round to this job, I have been avoiding it and now it's time to sort it. the house is approx 27 years old and the 2 concrete lintels that support the inner and outer skin of the front of the house is in my opinion very inadequately supported...

hi guys if you had to design a heating system what software would you use? I have seen some done by you guys in the past posted on here and could do with one right now regards

cheers I'll have a look for those, is it somthing that can put on the angle grinder or is it a hand held thing?

hi guys thanks for all the help and advice, it is really appreciated. I have managed to get a 900mm ergo glide cutter, (topps tiles own) from work and it cuts them perfect almost every time even long ways down to about 1.5 inches. I'm wondering is there something that cleans up the cut edges...

thanks I have seen a bridge saw in the store at work, i may have to borrow it for a bit do you think the monolith will do the job or can anyone recommend a manual cutter for porcelain tiles, hopefully one that wont break the bank as it's only really for my bathroom,

hi guys just tiling my bathroom at home, the wife chose these tiles https://www.wickes.co.uk/Wickes-Olympia-Grey-Polished-Sandstone-Porcelain-Wall+Floor-Tile---600-x-300mm/p/213367 tried 2 different manual cutters and they cut short ways successfully 2 out of 4 tries and long ways no chance...

hi guys I bought one of these a few years ago and come to use it and tubes have smashed, does anyone know where I can obtain replacement tubes as internet searches have got me nowhere regards rich.

thank you I live in South Yorkshire 5k sounds better than I expected tbh

hi guys just buying in process of buying house and seeing how far our budget will get us, and going to do facelift straight away e.g. new Windows door and fascia n soffets and gutters n pipes etc and at same time we are looking at putting an extension on front of house single storey only...

Hi guys just doing my shed with these sheets and wanted black but could only get hold of green so thought I'd paint them black, what would you guys recommend I use? Regards Rich.

hi update i have found the fault to be with the ram

hi guys i inherited this laptop and it has high sentimental value rather than financial, since taking ownership of it i have used it once and it worked like a dream this was 7 days ago and i turned it on today for the wife and it booted up and said something like windows update installing, then...

you really need one of these http://www.fernox.com/equipment/powerflushing/tf1+flushing+adapter the magna cleanse is designed to work in conjunction with a powerflush machine Regards Rich.