Search results

i have hot water but normally when somebody has had a bath (like I just have) the boiler fires up but nothing. Could it be the programmer rather then the boiler? That is what the manual is suggesting - there is no error code showing.

I know that c should be displayed when firing up but have no idea what you mean by L1 and L2?

My ideal he24 will not fire up. 0 is displayed on the boiler and the manual says that if any problems its not the boilet. I've tried to put the heating on to take the chill off, it worked yesterday but nothing today. Have turned boiler on and off, turned off and reset honeywell control...

will give the ptfe a go then, do i wrap a fair bit round. If that doesn't work means I've got to mess about getting more cooper!

it works fine, everything went to plan, hardest bit being getting the drawer unit out where the dishwasher will go. I didn't fancy using solder fittings in the back of the cupboard and been as you can't see them I used compression fittings. Problem I have is with the elbow, I've tighten and...

could I take the current nozzle off put waste pipe in there to an elbow facing up the some more waste pipe so its like on a small upstand, Would this work and be ok.

good that is how I have done it. Also noticed it has a hole inbetween the 2 nozzles should that be there which means putting an elbow in so its upright and water doesn't go everywhere once I empty the sink?

Right I am back to wanting to install a dishwasher, 2 with 2 kids and going back full time am going to need 1 I think. I have brought a macalpine twin waste V33WM it says on the bag, I've opened it up and on the bag it tells you which way to but the rubbers to connect to 40mm pipe but the...

Thats what I don't want to do change the worktop, if i have to the sink will just have to stay for now

right I've decided not to waste my cash on a dishwasher and instead am going to upgrade my sink which ain't great anyway. It measures 950mmx520mm. Only size i can find is 950x500 will this be ok to use and seal at the back rather then use the brackets. Don't think the bigger sizes are going...

phew didn't want loads of the stuff or it works out too expensive! Thank you

In my infinate ideas I am toying with the plan to remove a draw unit in the kitchen and replace it with a dishwasher. Its on a different wall to the sink and waste but having reviewed it I can extend everything. To make the job easier I want to use plastic pipe for the water but can i buy...

Hello all, Finally finished my bathroom after 2 weeks, well chuffed with it and could not have done it without this forum!! Anyway have been speaking to my uncle who is about to have the hallway and kitchen floor tiled. He is taking out the washing machine but unlike mine with a stand...

brass ring do you mean the olive??

I've learnt loads on the 'theory' of stuff but if something does go wrong thats when it gets me, Hence why I read alot of posts on here about things going wrong - sad like that really

the amount of stuff that I've had to deal with after starting a little job in this house I'll have more experience then those on these overpriced courses :lol:

deffo not stopcock - wish it was. You can see it spraying out of the grey bit. There is plenty of lead to get a compression fitting on but what do I cut it with and if I don't cut it straight (likely!!) can I file it?

Well plodding along ok with bathroom (not had chance today to look at bath but not to worry! Went in the cupboard today that houses the mains stopcock and it smelt a little damp. Inspected the stopcock all is well but as I pulled my hand out it was hit by a little trickle of water. Got...

Will have a look at that in the morning, only problem I have is that part way down the wall that was under the old bath is just brickwork so not much by way of hacking I can do, but even a little reduction is something!

yes I am still on with the bathroom - 2 weeks it'll be on Thursday although to be fair I was ill for most of last week so didn't do anything. Right after finally levelling the tw@t the walls are way out with it comes to fixing it to them. If you have it flush with the wall under the...