Search results

1.5mm, 5 amp fuse and most of the lights are low energy. Should be alright then.

Hi all, Topping up the insulation in my loft from 100mm to 270mm,managed to get 90% of the ring circuits,cooker etc on top of the new insulation but struggling with the lighting circuits there's not a lot of free length on these. Is it alright to leave these underneath the insulation? Ta

But they do, warrant only last 3 years and you then pay around £60-£100 for a 6 month extension to the warrant. I'm North of the big wall by the way.

cause it's Sunday and he's not working :wink: and I dont really want to pay out for another extension to my warrant if I dont need too!

Been building an extension on the house which consists of a kitchen, utility room and a garage. Completion is due Dec2010, or I should say the warrant expires then. Funds are a little tight at the moment and were not sure if we can fit the kitchen before the warrant expires. Util room and...

Tiles are Italian with a matt finish I would say, certainly not polished. Have a cutting with a couple drops of water on and will see what happens. JC would that be your choice of sealers?

Hi all Just tiled the utility room floor with porcelain tiles (Rajah Rust, Angora Collection) from Topps tiles. Hoping to grout the floor in the morning, but do porcelain tiles require sealing before I grout. Some say all porcelain should be sealed others say only if it says to do so...

There is an oak floor to go down first, and then skirting etc on top of the oak hiding the expansion gap, rather than having to use trim to hide the expansion gap which I don't like the look off. Think I'll go for the block method and router a small radius on the blocks to releive the edges a...

Hi there, I have a lot of skirting and architrave to fit and was just wondering if the current trend is to fit blocks at floor level where the skirting and architrave intersect or just bring the architrave down to floor level and butt the skirting up to the architrave. Will be using...

Three answers in 4mins can't be bad, Thank you all. Adam_151 understand your concern about meddling with his work but he has no probs with this.

Building an extension and the electrician has been and first fixed what was planned. On hindsight I could do with a couple more light switches for the hallway lighting.He as 3 core+E pulled through at either end of the hallway for switching at both ends of hall. I would now like a switch in...

No, just the one pipe was replaced, must get it booked back in and get the pressures checked. cheers

Hi all, Any ideas what would cause the air con in my car to cycle on and off? When first engaged it will run for approx 15-20secs and then stop, after 50-60sec it will come on again but only for 3-5 secs this time, the whole process will keep cycling as above,i.e. on for 3-5, off for...

The last 2 look like they are boat wiring,possibly a mix of 240v and 24v..

Its a dividing wall for an internal garage, foil backed plasterboard on the warm side and fire board on the garage side.

I have a 4x2 cls stud wall requiring insulation, will use either 70mm Extratherm rigid insulation or 100mm Isover glass wool. Out of those two what would give the best U value. thanks

That's what I was hoping to hear, must convince the other half now who seems to be digging her heels in regarding a varnished finish :roll:

As title says really, what do you find yourselves doing more off, varnishing or painting skirting and facings these days. Thank you

Anybody had any dealings with this company? Just wondering about quality of units/doors, customer service etc

www.pasquill.co.uk 9@ 9.560 span pitch25° 7@ 5.800 span pitch 25° 4 valley trusses 32 truss clips 4 gable ladders came in at £1190 for me, might give you some idea of cost.