Search results

hi i live in a bungalow and need 2 valleys replacing each about 5m in length. so what should i be paying to have the tiles stripping off round the valleys, new felt putting in, new fiberglass valleys, re points etc many thanks jon

hi folks i am building a workshop in the back garden. One of the wall which is 6.5m long will but up against a 2 meter high garden wall which made from gabion baskets which support the lawn. my concern is that water from the wall will drain through the gabion wall and then i will get damp on...

yes it is 110mm have i understood that right is should be less than a 1.5 degree drop over the entire length 20 + meters ???? cheers Jon

hi folks i have to reply all the main sewer drains in the back or our garden as they are fibre pipe which is collapsing. however i am not sure they were put in right in first place. could someone please advise me what the optimum drop on the pipe should be in degrees many thanks jon

many thanks for that just what i needed to know cheers jon

thanks for that but i know that much i need to find out where and how deep it runs as it goes straight down under the meter into the ground. cheers jon

many thanks for than Pete kind regards jon

not sure if this is the right place to post this but can anyone tell me hown to find out where my gas supply comes onto the property as we are digging up the front garden next week and dont want to go through it. cheers jon

hi folks just had a problem with a mains feed which i have now fixed. The only i could do it was working on the line while the water was turned on. a plumber friend of mine lent me a type of bar clamp that which has 2 wing nuts on it which just pinches the pipe to stop the flow. does any...

hi folks anyone know were i can get some cheep block paving blocks from. i need between 53 and 150 sq meters many thanks jon

many thanks for the advice cheers jon

hi folks hoping some can tell what is the minimum air/breather gap you need between the roof tiles/membrane on the inside of the roof and the finished plaster board. The roof trusses are 4 inch thick could I get away with putting 2 or 3 inches of kingspan and leaving a 1 or 2 inch air gap...

yes this is what i am looking for i have an option to get this for 185 i think. cheers for all your help jon

i was thinking about the GSB 18 V Li-ion 2 speed dynamicseries combi in L-Boxx Special execution 1 x 3.0 Ah or the GSR 18 V-LI (2 x 3.0 Ah, L-Boxx) Li-ion 2 speed mid-range drill/driver in L-Boxx but i would consider teh 14.4 as well

great way to describe it many thanks so the 3.0 has a fuel take 2 1/2 bigger that the 1.3. cheers jon

hi folks I have the opportunity to buy some new bosch blue tools (yippee) i know i need to go for lithium batteries that much is fine but i have a couple of options 1.3ah or 3.0 ah what does this mean and what extra does this give me also whats the best bosch blue drill/driver to go for...

hi many thanks for coming back to me but these are not quite what i am after i am after a free standing gravity retaining wall system with a height of 1.8m + cheers anyway jon

hi does anyone know of any companies that supply interlocking retaining wall systems in the uk and the approx prices per block. as i am looking for a better/cheaper system to the traditional brick build wall. cheers jon

hi does anyone have any plans or designs for a garden retaining wall of approx 1.8m high. how big do the foundations need to be, how thick should the wall be to retain this amount of soil cheers jon

like the L re bar idea may use that, many thanks for your help cheers jon