Search results

I feel I may have majorly cocked up with my planning here. I am looking to replace my bathroom sink, because over time it's proven to be too small for our requirement. The one I am replacing it with is a rectangular shape and therefore has a much larger area. It is also approx. 3cm wider than...

OK so we're not supposed to leave leftover paint tubs in sub-zero / scorching temperatures. The problem is, finding somewhere where they can be stored at room temperature is not always easy. I have around 8 tubs of unused paint after a whole-house decorating job (emulsion, gloss, etc). I have...

Hi all, I am looking to replace the sink in my bathroom. The sink we currently have is generally OK, but we're quite messy people and we tend to get water down the sides quite a bit! I feel that's mainly due to it being a round shaped sink. Pics below to illustrate: I think a rectangular...

Apologies if this isn't the correct place for this topic. I have recently been painting and decorating and have been using the kitchen sink to clean paint brushes, tools, etc. The problem is I think I've stained the surface by doing so. I think this is a ceramic sink. See pic below: I have...

Hi all, In my last home I had used retail matt paint and I found that it would easily get smudged / stained. So when I was going to paint my new home, a few people recommended that I use trade vinyl matt instead. I was told it had additives that would reduce the smudges / stains and make it...

What size tin of Zinsser Bin should I get to prime all 8 doors?

It doesn't look like they are either varnished or stained. Just looks like bare wood to me. Interesting. Is there a reason for that? I normally just dip them straight into the paint.

I have 8 doors in total to paint. All the doors are currently unpainted, as per pic below. I have two questions: 1) I am planning to use Dulux Trade Undercoat (oil based), followed by Dulux Trade Satinwood (also oil based). Do I need to use a primer before applying the undercoat? 2) What...

@opps thanks. So if I apply some of that oil based undercoat, will that help to achieve a more even surface? I know in an ideal world this would have been completely sanded down, but I've got 4 of these frames in total and it's been hard work getting it this far! So I'm just trying to protect my...

Cheers. Is this one OK? https://www.amazon.co.uk/gp/product/B009W68SPW

I have just scraped off a few layers of paint from this door frame: I've not been able to fully strip the paint off, and it's not completely flat - but I'm not really looking for a perfect result. However, I was wondering what primer to use to achieve a half decent finish? Eventually, I am...

Just had some new architrave fitted, the old one was decades old and when it was pulled off it caused some of the plaster to come off too. What's the best way to fill this in? Ideally I want to achieve a seamless finish as possible.

I have applied two mist coats and this stain is still coming through. I have no idea what it is. Its not raised or anything. Am I right in thinking that I need to use something like Zinsser Bin to block this stain before I apply the top coat?

The problem is the gloss paint is so thick in some areas that it looks ugly. I guess I would just have to sand those areas down. Can I apply this satinwood paint directly to the unpainted door (as shown in the pic) - or do I need to use some kind of undercoat first?

@opps as I am using a vinyl matt as my finish coat, should I be doing 2 coats of this, or can I get away with just one? It's also white, so I'm thinking it should be OK in one coat. Or should I do a "full fat" coat using the contract matt and then one coat of the vinyl matt?

I am planning on painting some door frames and skirting using a water based paint (something like Dulux Trade Satinwood). The problem is they currently have gloss paint on them. I have tried scraping this off using a heat gun, but that was a slow process and the smell was giving me a headache...

I cannot believe the amount of conflicting info out there on this topic! I have seen many people recommend to use a "contact matt" as a mist coat - and that's the advice I went with in the end. In addition, many people have specifically said NOT to use vinyl matt as a mist coat - see this...

Sorry to ask a silly question, but if I understand this correctly that means for every 9 litres of paint I should add 1 litre of water. Thus, for half the amount of paint, i.e. 4.5 litres, I should add 500ml of water, right?

Hi guys, thanks for the responses. To be honest, there are so many differing opinions on this. I did watch a few YouTube videos where people were doing anything from between 30% to 80%, and all still achieving good results. I just decided to go with 50/50 to go with a middle ground ratio. So...

I have attempted my first mist coat today. I am using Leyland Trade contract matt emulsion, with a 12" medium pile microfibre roller. I used a mixing ratio of 50/50 for this. As you can see in the pic below, there are paint lines where I have applied the roller. Is that normal? You might...