Search results

Hi, Well sods law struck. We are having our bathrooms done. Main one does first (just started and stripped) so only way of bathing is the en suite shower. First day it breaks. Its been dodgy (setting temp) for a little while but doable. Got stuck on hot. I've just took it apart and its...

Ahhh right. Thanks so much.

Hi, I need to remove a towel rail temporarily. My thinking was to use the usual cap on the TRV to close that but then looking at the other side I can't see how I shut that one down? Can anyone advise please? Thanks, Paul.

Thanks Rob. Any usual solutions for the side where the 'gap' will be seen? The riser kits have a panel I think.

If you use a riser kit on a stone resin tray, do you still need to use mortar etc?

thanks Rob.

Hi, I'm just about to order a Merlyn 10mm shower wall with top stabliser: https://merlynshowering.com/product/10-series-showerwall-with-stabilising-bar/ It will go onto a Merlyn tray...

Hi, I am getting a walk in shower. The space is 1550mm and will do one 80mm wide. Perfect solution would be stone resin tray at 1550 with drying area. Looking at a 1000 Merlyn 10mm shower wall. Reading then that is as far as I could go. Was thinking 1100 but ready you need 500 at least for...

Thanks all.

Hi, I'm about to pull the trigger on a Hansgrohe concealed Raindance setup 2 outlet for 900 notes. I've also seen Grohe Grotherm setups that are a little cheaper but look good too. Any comments between the two? I'm a little put off Grohe as they are not German anymore and I've read they...

OK so if I open the kitchen tap (which is on the same 'leg' as the outside tap) at the same time the pressure drops from 1.9 (dropped since earlier I guess due to usage of other people) to 1.4. I'm guessing thats bad? I don't understand why there is a difference in flow between the hot and...

Hi Madrab. Been and got a pressure gauge: Outside tap is 2.2 bar and 16l/min Upstairs mixer in main bathroom is running Hot: 10l/min Cold 14l/min Both on at a 'shower' temp = 12l/min Managed to be able to test the current shower (see pics) output with the old mixer: pressure = 1.5 bar flow...

Thanks madrab

I’ll or this one. https://www.rubberduckbathrooms.co.uk/aqualavo-White-slate-effect-shower-tray-1500-x-800mm?filter=%26fl31%3D1500+x+800

Maybe this one https://www.showertraysuk.co.uk/white-aqualavo-1500mm-x-800mm-slate-effect-shower-tray-3102

Oh right. Any other ideas for one that will sit a little higher please?

Thanks Madrab. The tray is 30mm so I think the tiles in the picture have been flush fitted but they do not need to be but could be wrong - hope not because I don't want it flush to the floor :).

Hi, We have an unvented system which will only give about 12l per minute hot water from the upstairs mixer tap. Think I'm stuck with this. Installing a new shower (looking for a good quality concealed solution) but obviously our flow rate is not the best. Therefore thinking of the hansgrohe...

Hi, I'm looking for a 1500x800 stone resin shower tray. I think I'm going for a Merlyn showerwall (Merlyn seems to be thought well of on here) so naturally was looking at a Merlyn tray: Wall...

Great info - thanks for taking the time guys.