Search results

Thanks so much. I am quite handy despite what my boyfriend tries to say so I will probably try it myself. ill get the cartridge and give it a try

Yes I do have a red jacket on the cylinder any info on how long it takes to change the cartridge

Do you think item 5 from this picture would be a suitable swap and the screws all line up perfectly. I personally don’t unless I can get the exact replacement by knowing the model the plastic temp knob is always going to be broken. I even thought about using plastic poxy filler but my...

Hi thanks so much. I have not taken out the old yet but it’s so stiff I had to use pliers to change the temperature so I know it is the cartridge that needs replacing I have gravity tanks in the loft and a system boiler so I guess the grey one is the one to go for. I don’t even need to check...

I did look on that website but I still cannot find the exact model so that I can see if a part is interchangeable and can be replaced how long would a plumber take to change the cartridge. Is it a 10 minute job or a three hour job. Those cartridges are £110 and I can’t replace the whole unit...

I contacted Aqualisa but they were not able to help which is a shame I am after the model number of the following old shower to see whether i can replace the cartridge and the temp knob which is broken The temp knob is stiff to turn Thanks so much for anyone who can help!

I had an electrical check who reported that the "Ze was too high" and that we should contact the DNO which is uk power netowkrs The guy came out and basically said there was nothing he can do = He indicated that the best course of action was to install a RCD Can anyone confirm if there is an...

Hi Its 4.1 to the top of the ridge - As you can see the roof is very steep pitched so I assumed 2.1M thinking the roof would have to be reduced in size In any case I really do not understand how a qualified distinguished architect would deliberately lie or get things wrong. It must be a...

Is that how its done then? Create a massive dormer but block it off and say its not used to magically come in to < 50 cubic metre??!

Very helpful - Thanks - I really wonder how the architect wrote down 50 cubic metres in that case Just for my curiousity what would you say the rear dormer would add exactly in cubic metres? Thanks very much

Did you check the plans attached to the original post? They were drawn up by an architect on a house two doors down and he makes clear it is less then 50 cubic metres. Did he make a mistake and therefore his indemnity insurance will pay up or have you made a mistake. The wine will probably go...

I managed to get hold of some plans which my neighbour had drawn up - Interestingly he did not get a lawful development and proceeded to build it I want to copy him as he has done two hip to gables and a full width rear dormer but i do not understand how he and the architect which has indemnity...

What am I asking is whether you need to object to ALL applications or not? The 21 day window finished yesterday for replying but I am going to call the counil It would not suprise me if the 6M application goes through because I did not object to that one as well !

I only have a PDF of the image - The drawing was done by a technician who has now left the country so he is no longer available. Are you saying that this needs to be redrawn in Autocad from scratch because I dont have the digital file? If thats the case how much time do you think it will take?!

My neighbour submitted planning application for a 6 metre extension and I had two questions: 1) Can the extension be full width of the plot of land or does it need to be full width of the house only. I thought it was full width of the plot but the council have said it is only the house...

Heres really the changes I would like to achieve

Hi guys and girls I have a drawing produced by an architect a while ago and I want to change the rear elevation picture. Everything else I can do myself The diagram below should have two small changes: 1) A flat roof on the first roof rather then a pitched roof 2) An infill to the first...

Hi It was definitely permitted development because no planning permission was granted and the neighbour complained and it was deemed fine I want to do the same on my parents house and the house is identical so understanding how permission was granted would help a lot

I am aware that a loft on a detached house needs to be 50 sq m or less to permitted development My maths from high school and triginometry is not so great - I know that a prism volume is (height * width * depth) / 3 and I ve been trying to calculate the existing volume and the new volume to...

I ve seen no posts on this subject which makes me think I must be mad I have a laminate floor or a wood floor but that’s a separate story. It’s scuffed marked and generally in a bad shape so I was thinking to paint it with heavy duty floor paint. Has anyone ever done this?! What are the...