Search results

It was taken out, they put it back after finishing and cut a perfectly flat wall (and stop bead underneath) to put it in.

Mod please delete, the head contractor has been quite decent and is rectifying the work. Happy days .... glad it will be completed properly. Case of workers doing what they wanted without communicating with the boss.

I have noticed that when I switch the electric plug off and on at the wall socket next to the cylinder, the water heats correctly the next day. Does this signify anything ? is this resetting something which is not doing it automatically ? I believe the wall socket electric cable runs to the...

May get a radiator replaced at the same time from a double to single same dimensions 140 x 60, any ideas of the labour cost of that would also be helpful ( in addition to above post). Many Thanks

Is that not integrated/ attached to the unvented cylinder? The cylinder is 2.5 years old would it not be covered under warranty? If not what would I be looking at for supply and fit? Any ideas? Many Thanks for your help.

no they all seem the same, Kitchen is the same also

Hi All For the last 3 days the hot water is just warm not piping hot like it used to be, we shower with the temperature control completely to the max and still just warmish water comes out. Any ideas what could be wrong ? System was put in 3 years ago with a pressurised cylinder (Elson...

What would I have to do as the cheapest option to allow my gravity fed system to be programmed separately for water and heating ?

Guys I have a fully working ep2002 but want to replace it with ep6002 purely to get independent timing for the water and heating. What would be the replacement procedure is it simple ? would I have to do some minimal rewiring ? as I want to carry it out myself Would the ep6002 work...

Hi All Was looking to install a new exposed mixer bar shower and wanted to draw on your experience of which brand is better in reliability & quality Hudson Reed vs Mira vs Grohe shower ? Any advice ? Hudson Reed I was told use metal parts/inserts and the majority plastic ? Thanks...

Any chance you guys could advise me also as looks similar to my issue http://www.diynot.com/forums/building/sloping-floor-stud-wall-partition.325358/#2411184

I have a stud wall which appears to have been built straight onto the timber floorboards and caused them to dip/bow causing a slope on the floor of the bathroom next to it. There is no wall directly underneath downstairs and I believe the joists run in parallel to the wall. Some movement a...

I was thinking of fitting a non electric power shower and was wondering are they very noisy ? if you take the letter L as bathroom walls the long line will be a bedroom wall and the short line where the shower will be fitted is a corridor wall will it disturb the people sleeping in the adjacent...

Thanks the other worry I have is that the rest of the house has old 15mm copper pipes and I really don't want them to leak after the install. Is this common ? I have had a new 25mm mains put in but have been told there is a chance that old pipes can leak. So just wanted to know from all the...

Miljee, it's been a year since you posted and I am in same dilemma as you did you manage to work it out ? Any help appreciated.

Looking at Megflow sylinder, is it better to have External or Internal Expansion and is there a way to fit it so it is better for a water meter ? Thanks All

Thankd adl ... this is what I have on the side of the pipe RENOR-001/294 UNE 53415-2 EX PB 15x1.7mm B1. 000.5/1.0BAR. DIN POLSKA INSTAL Any ideas ? can i use any inserts ? as it says on web only to use pipe manufacturer inserts ? when can i get inserts for this pipe or should...

Drilled into the concrete floor of the wet room to install waste and hit a 10mm grey cold water plastic pipe coming from the kitchen to the sink of the wet room. I have no idea the manufacturer of the pipe. What is the best way to repair this pipe/hole please ? I could not find a pipe...

Thanks Robo prob just over 1m, for the megaflo would i need to run 22mm everywhere from the cylinder as well ? or just main to cylinder and 15mm elsewhere is ok ?

I am looking for some advice with how best to resolve my water pressure within my property. 4 bed property with kitchen, 1 bathroom and a electric shower/wet room downstairs. Standard water tank, cylinder & boiler setup with 15mm pipes running through property. I want to add a shower to...