Search results

I have a full roll of 300mm x 3m and 450mm x 2.5m any others west sussex pm for location

they must be millonaires just had a quote to hang a pair internal doors 1168mm in total doors are oak venner new frame so will shoot straight in once i just adjust one leg, also to fit the architrave and door stops and the ironmongery carpenter to supply hinges rebated catch and two star...

having a bit of brick work done to fill in on 8 ft patio door, been in the lecky trade for years so have seen a fair bit and picked up a fair bit of knowledge so i was surprised to see the reveal ( having new door in new location) does not have wall ties nearest one is about 600 away now i...

bit dot com ? need a new lining and was planning to build new wall with either 89 mm cls or 92 mm treated and 12.5 mm plaster board as thats what i have but the door linings seem to be 132 mm or 106 mm so nothing seems to fit with either 12.5 mm or 9.5 mm plasterboard any suggestions please

Hi all what is the best way to install real wood flooring (oak) on to tounge and groove floor boards if possible i would for ease float it like laminate but not sure if this is suitable method will be puting down an underlay as well thanks

drops to 2nd or sticks in 2nd, message comes up saying check gearbox stop turn off, restart and car is fine no warning, only does it when cold and only does it every other day could battery or ABS confuse computer in to thinking its at the wrong speed ( as has been suggested) had it...

HI ALL can someone help ? have a some natuarl stone tiles to tile on to a hearth and am wondering about the grouting I am worried about spreading the grout about as you would normaly and then not being able to clean it off the tiles as they are very porus and not glossy etc any advice...

tiling on new hearth , should i seal it first ? thanks

http://www.screwfix.com/p/jg-speedfit-bpex-barrier-coil-pipe-25m-x-15mm/11027 can some one advise best way to insulate longish lenghts run under floating floor ?

square edge or taper edge? i may scrim and fill but could get skimmed , which is better please

Hi All does anyone know about the company simply plastering? i am considering doing a very short course there ( 1 or 2 day) i have no intention of becoming a spread but i am renovating my house and i would like to be able to skim the better walls and to skrim and coat the new plasterboard...