Search results

Forgot to upload this image and again excuse the dust. Don't have experience of soldering but willing to try, at this moment the treadmill is goosed (so can't make it worse) and thanks to COVID, prices are through the roof so wife is holding off just now. What type of fuse is it and can you tell...

Wife went to use treadmill the other day and she said there was a bang and it tripped the fusebox. There is power getting to the on/off switch as it lights up but no power to the tracking unit and treadmill motor. Took off tge cover and it looks like a soldered fuse has blown. Is this an easy...

Try best to decsribe this. Loft hatch is between 2 rooms in tge hall, so traditional pull down ladder running parralel to the joists wouldn't really work as wojld have to have drop into room almost. Now could I have it running across the joist but would there be enough room to get up with the...

Got it sorted, engineer replaced the expansion vessel but after about 6 hours or so can hear dripping but no evidence of any leaks coming from anywhere. This was without hot water being on. cheers

Moved house few days back and have 7 days to report any faults. Whilst checking on the unvented cylinder to check for leaks (had previous on leaking UC), after about 20 minutes of hot water on a single drip can be seen every 30 - 40 seconds until the hot water is turned off. Is this something...

You sir are a gentleman and a scholar, keyboard working, tamper light off and day button on. Will now get round to trying out the alarm in the next few days.

Got the 1st part and all good but 2nd part, i'm lost. Detector?

Pics as requested and yeah I'll give the inside a clean. Took with my tablet, so not ghe clearest images.

Should have mentioned that one of the PIR's is missing the front of it, showing the wires and terminal 13 (for reboot) didn't have a wire but looked like a staple connecting it to 14.

Cheers managed to get manual for xl6, just different terminal numbers from above though. Only thing now though is the tamper light won't go out and keypad is locked. What is strange now is that if you walk past a PIR it shows on the alarm panel whereas it didn't before. I think the zones were...

Had a problem with my meter (burning,smoking)and had to get an emergency replacement, power was off for 3-4 hours and when switched back on the alarm panel was going mental. Switched if off a fuse. Now I don't have the manual for it or a code, previous owners had never used it either so no code...

Tried the mallet and the cord thing, wouldn't budge. I know it's the same (more or less) with cord trick but how good are those boa wrenches

Going to get this cartridge off and measured today, so i can pick up one tomorrow from screwfix when i'm at work (it's round the corner from it). However when it comes to taking off the cover that covers the cartridge, it won't budge. it's similar to this one. Can take the knob off but that...

Anyway of getting the size without taking it off (kids in the house).

One of my basin taps squeals and leaks if someone has a shower (tap and shower run from combi) or runs the other hot water taps. It has now got to the anoyying stage and i'm now going to fix it. The taps are similar to Screwfix Etel basin pillar taps. Now the questiin is this. What seals fit...

Yeah, it's overflowing. Adjusted the float a few times and even held up tge float manually and it still ran.` what kind of washer will I need to replace. Cheers

Just wondering on this one, occassionally the flapper would stay open (another flush sorted that) but not 100% sure but I may have restricted the flow to the cistern slightly and have now opened up the valve to full. Is it possible the lack of flow could be problem of continous flush into tne...

So has happened a few times now, whereby after flushing the water will keep trickling into pan via tge overflow pipe. Each time i've turned off tge water, took top of inlet valve off and turned on water again with a cup over tge valve for 30 seconds or so. Cleaned the part i took off and fitted...