Search results

I very much appreciate ur speedy response Cakeman as this needs sorted quickly, but are u sure? and can u explain what happened? to go from working fine to not working at all just like that? having looked at the seal and possible routes for the water to pour out as it is, it doesn't even seem...

My mistake PrenticeBoy - it is a CCU rather than an FCU. Apart from that - u say basically 'just connect the cable - live to live etc' That's been the problem from the start - How? there is nowhere for the wires to go. There aren't spaces under the screws that u tighten down onto the wires...

The cable is coming from the terminal outlet box (i believe it's called) which is mounted on the wall directly behind where the cooker sits (the cooker covers it). This is fed from the fused switch just above the worktop. There is no cable coming from the new cooker. Sorry the...

So i decided to clean the filter of the machine even though there were no problems. Cleaned it, put it back and.... water! ... on the floor. Pouring out through the two holes u can see either side of the centri bit. Were there some kind of ball bearings at those two holes that i've lost. Strange...

..

Popular guy eh. Well, for the benefit of anyone with a similar quandry: I tried the bitumen mastic, but that stuff is seriously unpleasant to use, especially on smooth wet surfaces (couldn't find my blowtorch) you can basically forget about tooling it - it sticks to everything except what u...

The fridge is working Ok, but the freezer shelf at the top is only half freezing the food. There's a control for the fridge but not one that i can see for the freezer. LG GC 151SA Model: 31RE3006 Any suggestions welcome Thanks

Just the manufacturer's name (can't remember what it is) The cable colours are red, black and earth. Cheers

7 KW, 50hz, 32 amp It's just replacing an old Creda Hallmark double oven, so the cable (6mm), isolator switch and fuse (30amp) are already there. This cooker doesn't have the usual (to me) easily recognisable live and neutral terminals to simply fasten the cable to (similar to wiring a...

Cheers PrenticeBoy, Here's a link to the cooker on the newWorld site. It doesn't give much info and i'm rushed at the mo. I'll try to get more when i can. http://www.newworldappliances.co.uk/ES50S_s66.aspx Thanks

Hi all, I've got an improvised metal edging on a pitched roof to stop the water ruuning down the wall. Edging needed because the roof is longer at the top than the bottom - the ridge is longer than the eaves. The edging is 'L' shaped and slid underneath the slates. But the water is finding...

..

Cheers LJ, appreciated. Hib

Hi Folks, I've sanded and emulsioned the lid of a toilet cistern cause it was covered in ciggerette burns and i couldn't get a replacement. Can anyone foresee problems with varnishing it? Thought it would give a more dirt resistant finish, but there might be flexibility problems? Also have...

Hi all, I want to connect the cooker to the mains but the connections are new to me. Unfortunately i can't upload a picture but i thought one of you might know what i'm talking about anyway. What way are the wires connected. The brass bits look kinda like they would take crimps, but kinda...

..

Cheers Mw

..

Boilerman2 - i really appreciate your (very belated) feedback. You have little right to call me a fool - i'm here asking for advice, explaining everything as reasonably and politely as i possibly can, and those polite requests get ignored except for responses from someone who has already given...

i'm disappointed that others have not commented and my suspicion as to why is correct, i believe. The points i've made have not been addressed. Therefore i won't waste any more of my time - i've got better things to do If you can't figure it out Terry, then two can play at the game of...