Search results

Our old plinth heater stopped blowing hot air so as we got a new kitchen we plumped for a new smiths ss5 plinth heater, the heater works on cold but the supply pipes are not getting hot. I have turned all the rads off and hoped it would force the hot water through to the heater but it didn’t...

Thank you all. Advice was spot on it was just seized, a pair of grips on the bottom and a couple of hard twists and out it popped. Appreciate your help

Definitely can’t push this in. Do they seize up ? Can I use wd40

Can’t get it to move, definitely won’t push in :(. Is it just seized

Or even thrust. But maybe I’m being over cautious.

I try that but can’t gat it to even twist.

hi guys. I need my cooker taking out, it all ready except for the gas but I don’t know if it’s a push fit or not. Looks like it is but doesn’t seem to move. Obviously I don’t want to force it so can anyone tell from the photo and will it require a gas fitter. Thanks

Thanks

Hi We had a leak which has been found and repaired, unfortunately it has left a brown stain on the kitchen ceiling, tried painting it 3 times but it still shows through. Any info on the best way to tackle this ? Ceiling has been papered and painted with Matt white. Thanks

No need to answer this question now, I have found another post with some advice. Thanks

I have looked through previous posts but cant see what I an looking for :) Can anyone tell me the best way to cut Melamine so I don't chip the whole edge please, I have a double wall unit 735cm high for the utility room but I have to cut it down too 600cm as the ceiling is too low, and also to...

Thank you

The light says it doesn't need an earth, instructions say join the 2 earths together to make the continuity but as in my photo there is only 1 earth coming out of the wall. Has this light been wired wrong ?, if not do I just leave the earth in a block like it is now. Thanks

Cheers, we have had 2 so called heating engineers out last year, one said he had no idea why it wasn't working properly the other said it was electrical and spent hours doing something with the wiring which we thought had fixed it but obviously not. :(

Which ? the 3 port valve ?

Hope this helps

Hot water cylinder: YES 2 port valve Don't know I think so is there such a thing as 3 port valve ?

When we turn thermostadt up heating comes on but when we lower the thermostadt even to 0 the heating stays on, even if we turn the timer off. Only way to reset it is to go to the boiler and turn it off and then back on, that's fine until we higher the heating again then the same thing happens...

No I cant get behind the cupboard, if the fuse blew then that would initiate a completely new problem, the cupboard was there before we bought the house so at the time we had no reason to suspect there was any problems, (who pulls out a dishwasher when looking around a house you might buy ) it...