Search results

Quick update, no news is good news they say !! Car was collected by the Dealers last Friday , they said it was going to a Specialist to check the ABS Sensors & ABS Pump , I commented to them that was odd , they supposedly replaced to ABS pump about 3 months ago (Service sheet / internal invoice...

If they are Metal fittings it could be that the Fittings are damp , they get pretty chilly up there at this time of year , Maybe swap them for Pendants and try that ??

Back to square one , the same Warning Lights have reappeared , so its back into the Main Agents on Tuesday , Does each Wheel have an ABS sensor ?? it`ll be interesting to see what they replace this time ...... Cars still only done 67k !! Lucky

Thanks for the input John , appreciated

Finally have the Car back , hopefully the fault will be cleared now For info , they have replaced the OSR Abs Sensor and the ABS Pump , according to their Invoice details (no charge warrantied work) This is on a 08 Plate Car with 64k on the clock ..... is this normal can I expect more sensors...

and you didn't say it was for a commercial type Garage ....... NEW SUPPLY RQD , Starts saving up !

Quick update ..... its stuck in the Garage awaiting a part they are supplying FOC , unsure yet what part , but I`ll find out Cheers

It would be a good idea to let us know what you want to install in the Garage , I know you mention the Shower Circuit , but it doesn't say you want to install a Shower in there, If its just Light & Sockets you don't need 10kw cable as you put it You may get away with a smaller Cable run down the...

Thanks for taking the trouble to have a look and reply , The Car has been in the Main agents since Tuesday , I cant fault how they are doing their best to sort it (Chorley Nissan) , They picked it up on Tuesday leaving me a Pulsar till they return it , hopefully fixed !! But I`m guessing they...

Hi all Back again for a heads up on an intermittent fault on the 4x4 About a month ago 3 Dash lights came on 4x4 , ABS & ESP , the Car was due a Service and MOT under an agreement when bought a year ago , So it went in for this work and they 'sorted' it out , saying there was a bad earth on...

Hi Guys , thought I`d better post a progress report I managed to clamber in (my Van is pretty full) one problem I have for access is that I have a tool store chest bolted by the Sliding Door anyway I managed to get off the Panel and have looksee , I couldn't see anything amiss , plus still...

Thanks for the heads up .I`m off in the morning , so I`ll be climbing in to have a looksee I`ll update tomorrow .... hopefully Phil

Hi Guys I`m back looking for some guidance !! I`ve got a problem with the Sliding Door , Basically it wont open , when I use the Key remote there`s a sort of grinding sound from the Lock area , I`ve been inside and tried to unlock it from inside but its not opening !! Is it a Door off job to...

Hi Guys I`m looking for some advice / info I`m looking to get rid of the current Car (407sw) and get a medium sized 4x4 I`ve been looking at the following :- Spec Auto , Petrol about a 58-60 plate Either Toyota Rav 4 Nissan X-Trail Volkswagen Tiguan Nissan Pathfinder (yes a...

I`ll lay a pound to a penny , The Manufacturers instructions state an RCD is required imo Lucky

Hi Guys Thanks for the input , the old one locked solid and the Strap had to be cut to get it out , A replacement was sent , but it was the wrong one, the Original one had what I would call standard sides The new one had a slot and channel where a small Cable should be installed , If...

Hello all Back on here again looking for some guidance - MOT Fail , The Centre Seat belt wont pull out , so its a fail We ordered one via a Breaker who sent out a "guaranteed " replacement but when fitting it we have the same problem , it wont pull out even when not fitted ...... am...

Hello John Yes it was the Slave Cylinder , who in their right mind decided they would be better fitted inside the bell Housing , I remember back in the day when they were bolted on the Outside So we had a new Slave Cylinder and Clutch etc etc = £690 inc vat Yes I had a new Recon Box &...

:cry: ...........Garage says the clutch OR the Slave Cylinder has gone , Apparently the Slave is inside the Box ?? They are stripping it down today I`ll be back Lucky

The £££ trap has gone in for surgery , I`ll keep you updated Thanks for your help again Burnerman Lucky