Search results

I’m thinking of fitting an AEG IKE84441fb induction hob. A conversation with their customer support was less than helpful. Is their any technical or safety reason why this hob may not be flush fitted in a standard 28mm worktop with or without a drawer beneath?

A second quote suggests that a Baxi is better, having a SS heat exchanger as opposed to aluminium, we are confused as to which we should choose as prices are similar.

Thanks, will check that.

We have been offered either an Ideal 18kw or Worcester Greenstar 18Ri heat only boiler to replace our ancient Vaillant in our Village Hall. We would be grateful for advice on which one to choose, or whether another make might be preferable. Thank you in anticipation

I am surprised. Are you saying four dwellings can exit into a sewer chamber with no soil vents whatsoever?

Thanks Hugh, I have another bathroom en-suite the other side of the house which connects via another stack to the sewer downstream of the aforementioned inspection chamber, and it has the kitchen and utility room connected also. This group have had a Durgo in the ensuite with no odour or other...

Although I have posted this in the plumbing forum, perhaps here is also appropriate. I am adding an en-suite adjacent to an existing bathroom. The soil stack is in the bedroom which will have the ensuite. To gain space I would like to use a class A1 AAV to remove the upper stack. The stack will...

Also, fitting the Durgo valve will make the job a lot easier when replacing the 3 branch with the 4 branch connector.

Thanks guys

Good morning, I am adding an en-suite adjacent to an existing bathroom. The soil stack is in the bedroom which will have the ensuite. To gain space I would like to use a class A1 AAV to remove the upper stack. The stack will have the 2 bathrooms and a downstairs cloakroom into it. One other...

Thanks very much, will look at those.

I believe there are preformed panels with honey comb insulation that can be used instead of stud walls to save space, but cant find any information. Can anyone advise please?

Excellent, thanks guys.

I have a central plinth in my kitchen with MDF panels at each end. In the past the corners have been damaged due to wear and tear. Having new units fitted, I am trying to find transparent edge protector strip similar to the clear plastic plinth sealing strips but without the 'skirt'. Can anyone...

Update on this. The supplying company has referred the problem back to the manufacturer, who has stated that the doors are perfectly satisfactory, and that the cold air along the bottom of the fixed panel is due to outside air accessing the voids in the bottom of the frame via the drain holes in...

Thanks very much, this will suit.

Unfortunately it is in a weather exposed position, which is probably why the pneumatic one failed.

As expected thanks, I did think of cheating and using the - unused - earth, but my leccy friend would shoot me!

I have just bought one of these, SSTDS03, to replace an old mechanical type which failed. The instructions state "This is not a 2-wire switch and requires neutral connection', and has L in and L out, and N. As the existing is just a 2+E wire switch lead, this poses some difficult logistical...

Thanks, did that.