Search results

Any other suggestions? Thanks

Hi everyone, need some advice/help on what paints/sprays could stop the colour running from metal planter frame. The bottom part of the metal planter frame looks corroded and whenever it rains or when the neighbour waters the plants the white watery substance leaks onto my window below leaves...

https://www.dropbox.com/scl/fi/p9mxm8el7u8p227jj0930/IMG_1104.MOV?rlkey=qelkv2i1wgoaw0fzviuvygs6c&dl=0

Hi, the council just installed the below extractor fan in bathroom ceiling but is extremely noisy. has anyone had these fans installed and are usually fairly noisy? Trying to upload video so you can hear the noisy.

So far this set up without the flood light has not blown the 13 amp fuse in FCU…occasionally all 3 appliances are running at the same time and it’s been 6 months plus. I think will eventually run the floodlight to a plug with 3a fuse to socket on the main ring. If the 13amp fuse in the FCU...

Hi all, hope all is well. Everything is already in place expect for floodlight side of things. If the floodlight was to get installed as in the picture would that be ok/compliant? Thanks

Hi all, I was able to test the light with a plug and 5amp fuse. I came across a kinetic switch and receiver I bought years back that I didn’t end up using. Was wondering if could test this switch and receiver on the flood light? If so would all the 3 neutrals go in one wago, 2 earths in one...

Hi, I was hoping to quickly test the Luceco smart light shortly by putting a plug on the flex it came with. Given the info on the box would a 3a or 5a fuse better suited?

Can the feed from the light circuit be wired to a switch fused unit to load the flood light?

The back box is plastic….would I remove the connector block of the earth wire and insert into the earth terminal of the new metal face plate?

Hi, done the previous light switch successfully. Got another one I need some help with please.

Hi, yes I believe the flood lights I’ve seen come with some flex attached.

Hi, it’s on ring circuit 8 with 32 amp breaker. Not been able to open to see what cable size is connected to the MCB. Cable from the socket to FCU is 2.5mm2 with a 13amp fuse. Wiska box was to house the cables connections externally above the floodlight so they’re watertight…or alternatively I...

Hi, hope all is well. I am looking into installing an outdoor floodlight myself soon and was after some advice. Currently the nearest power point is a fused connection unit which is powering 2 indoor sockets which are supplying power to a washing machine, condenser dryer and a freezer. The same...

Hi, I was also looking to replace my 2 way light switch. Can anyone help by looking and pics below of the existing and new light switch and help identify which wires will go where please?

Filled the sink up and the water does seem to be going down rather slowly. Would either of plungers be any good to unblock the downstream?

Hi, When the washing machine is draining the water seems to fill up into the sink then slowly goes back down. I have all already taken the trap apart and cleaned it out but still is happening. Can anyone assist in what’s the possible causes and solution for this type of issue please? I’ve...

Yeh I’m sorry for the confusion over 1st pic ...the seller uses the pic on ebay...the rest of the pics I’ve taken after I received the item. Do you guys think this receiver is doable? The grey wire in theory would go with switched live (load)??

Hi I think i read somewhere it’s TV-5 Certificate

Hi Where I’ve indicated on the pic below is that incorrectly labelled ? Thanks