Search results

I like that. :-)

Yeah I am going to remove prob tomorrow as the footy is on later. I am thinking tho that it would be easier to silicone in place.

The mix was a 1:5 cement:sand mix. Depth was about 20mm. If you have an enclosed area - how exactly does the mortar shift? It cant go anywhere. As my ply base was true and level - it would have been easier to bed on a thin layer of silicone?

Ok I have read many threads on here and yes it seems these should be bedded on an even layer of sand/cement mortar. Then levelled and left to harden. Hey what could be easier! The reality however is somewhat different. Well it was for me. I installed my marine ply base spot on level -...

Thanks - that was going to be my choice. My present pump is a 15/60 what do these figures mean?

My wife tells me she heard a "drilling" sound from the airing cupboard yesterday. I can only imagine it was the CH pump. Would anyone agree? I have been thinking of replacing the pump as we have very hot rads upstairs and warm rads downstairs. If I am to replace the pump which make should...

Yeah wasnt keen on it thats why I asked. What should I have done? Stopped Aquapanel above tray? Its not to late to change it.

Yes I know! I am building a new shower cubicle with stud walls to 3 sides. The cubicle walls have been lined with Aquapanel down to floor level. The new ceramic shower tray fits snuggly inside the 3 walls. The shower tray has upstands on all 4 edges. I will silicone seal the 3 edges of...

I have read through quite a few posts on here re showers. I am replacing the existing small 760 square shower with a bigger 1000 x 800mm shower. I have removed the existing stud walls and fixed new studding to suit. I am thinking (at this stage) to use Aqua Panel (12.5mm) within the shower...

Ok. Cheers.

The aqualisa is available with or without pump. I have the unit without a pump so am fitting a seperate one. I have checked with their technical dept and they say this is fine.

I am fitting a 3 bar pump for a new shower. I plan to run the new pipework up to loft and across to an Aqualisa digital shower unit. My questions are;- 1) Will compression fittings be ok for 3 bar pressure? 2) Should I run all new pipework in 22mm? I will have to reduce to 15mm at shower...

Cheers lads, Sometimes I amaze myself - maybe I was blonde and female in a previous life :-)

I see - Its because the hand shower isnt sealed - hence water can get down the feed hose. So looking at diagram which end is the hand shower? Top right? With water flow indicated by arrows? Cheers

Probably me being dumb! Where does this tank go? Why does it have a drain connection?

Some time ago I bought a new bath suite complete with 4 hole taps. ie main mixer taps plus a separate hand held shower fitting. I have fitted many bath taps in the past but just opened the box and never seen fittings like these. It includes a plastic tank and the attached "instructions" -...

No this is not how to do it. If the builder will not do the job properley suggest you discuss with the Building Inspector - surely he has not seen this as yet?

Yes it is already artexed. How do you create the swirls?